| auszookers.com http://auszookers.com/forum/ |
|
| G16b Extractors - eBay http://auszookers.com/forum/viewtopic.php?f=5&t=32608 |
Page 1 of 1 |
| Author: | Oldmate28 [ Mon May 14, 2012 7:12 pm ] |
| Post subject: | G16b Extractors - eBay |
Hey all Bought some second hand extractors and the damn things aren't a straight fit. Has anyone bought any from eBay and found that they were a straight bolt up to the cat? No modifications required. Maybe post a link? Thanks fellas |
|
| Author: | tsock0 [ Mon May 14, 2012 8:18 pm ] |
| Post subject: | Re: G16b Extractors - eBay |
i bought some for a g16b off ebay $170 and they bolted straight up u might have a different exhaust or some thing not 100% |
|
| Author: | tsock0 [ Mon May 14, 2012 8:19 pm ] |
| Post subject: | Re: G16b Extractors - eBay |
i bought some for a g16b off ebay $170 and they bolted straight up u might have a different exhaust or some thing not 100% they were wild cat brand |
|
| Author: | Oldmate28 [ Mon May 14, 2012 8:36 pm ] |
| Post subject: | Re: G16b Extractors - eBay |
No worries. Does the bottom of your front pipe (end of extractor) hang much lower than the chassis rails? |
|
| Author: | SQUIRREL [ Tue May 15, 2012 6:53 pm ] |
| Post subject: | Re: G16b Extractors - eBay |
The ebay specials i bought come with a 3 bolt flange // not a problem if your replacing the rest but a PIA if using original system they sit with no hangdown at all // really well fitting do the ones on yours have the egr pipe ?? on number 4 ?? |
|
| Author: | Oldmate28 [ Tue May 15, 2012 8:00 pm ] |
| Post subject: | Re: G16b Extractors - eBay |
Yeah mine have the same flange to bolt the factory cat up but they end about 3 inches short and hang down too low. Just finished booting up the factory cast headers and I cracked one of them ARGH!! Not my week. I'm now committed to buying a new pair, hopefully I find some that bolt up to the stock system. |
|
| Author: | SQUIRREL [ Tue May 15, 2012 8:24 pm ] |
| Post subject: | Re: G16b Extractors - eBay |
fortunately i have the tools and friends to assist in manufacturing my exhaust on the cheap using off the shelf parts , ( mandrel bends & so forth ) if you have access to some sort of welder the rest is relatively simple ,, trial fit , measure twice cut fourteen times ,,,,, you may be able fit an adaptor or quietly drive to a muffler place and they can work their magic did you need a replacement header & front pipe ?? |
|
| Author: | Oldmate28 [ Tue May 15, 2012 8:51 pm ] |
| Post subject: | Re: G16b Extractors - eBay |
Yeah I might have to replace the header for the time being. |
|
| Author: | SQUIRREL [ Tue May 15, 2012 8:55 pm ] |
| Post subject: | Re: G16b Extractors - eBay |
a 6 pack of jack daniels would seal the deal |
|
| Author: | Oldmate28 [ Tue May 15, 2012 9:28 pm ] |
| Post subject: | Re: G16b Extractors - eBay |
G16b efi header? If you have one available that would be a huge help mate. 6 pack no dramas. |
|
| Author: | SQUIRREL [ Tue May 15, 2012 9:34 pm ] |
| Post subject: | Re: G16b Extractors - eBay |
g16b efi header with the dump section attached still ,, are you the same guy who picked up those white wheels? |
|
| Author: | Oldmate28 [ Tue May 15, 2012 9:39 pm ] |
| Post subject: | Re: G16b Extractors - eBay |
Last time I checked lol I can pick up from uour work again if that helps? You working late on Thursday? Wheels are nearly fitted by the way hehe |
|
| Author: | SQUIRREL [ Tue May 15, 2012 9:58 pm ] |
| Post subject: | Re: G16b Extractors - eBay |
yeah dewd done deal ill bring it in tomozzo , my mornin tis a bit hectic but arvo is fine ,,, i finish 430 every day / sorry |
|
| Author: | Oldmate28 [ Tue May 15, 2012 10:05 pm ] |
| Post subject: | Re: G16b Extractors - eBay |
No dramas, I'll pop by tomorrow or Thursday. Thanks again. |
|
| Author: | atari4x4 [ Tue May 15, 2012 10:13 pm ] |
| Post subject: | Re: G16b Extractors - eBay |
If you're pushed for time Oldmate, I can swing past the bottle-O & then past Squirrel's place of employment before stopping off at the fun factory for the night. shoot us a sms if you get stuck. |
|
| Author: | gregwatkins75 [ Tue May 15, 2012 10:19 pm ] |
| Post subject: | Re: G16b Extractors - eBay |
Not advertising but go see the guys at AAA exhaust, take the extractors and Jim the big guy will most definatley help you out and they do top quality work! |
|
| Author: | Chop [ Tue May 15, 2012 10:25 pm ] |
| Post subject: | Re: G16b Extractors - eBay |
gregwatkins75 wrote: Not advertising but go see the guys at AAA exhaust, take the extractors and Jim the big guy will most definatley help you out and they do top quality work! Not bagging them, but my exhaust fell apart in the middle of bumfucksville that they installed 
|
|
| Author: | gregwatkins75 [ Tue May 15, 2012 10:26 pm ] |
| Post subject: | Re: G16b Extractors - eBay |
mmm. i had a good experience is all im saying........... |
|
| Author: | Oldmate28 [ Tue May 15, 2012 10:31 pm ] |
| Post subject: | Re: G16b Extractors - eBay |
Atari could you possibly do that for me? Would be easier than me trying to break out of jail for an hour. Greg I did think of visiting AAA to see if they can help me out. Still need to replace my cracked header, the fumes are making me high! |
|
| Author: | atari4x4 [ Tue May 15, 2012 11:07 pm ] |
| Post subject: | Re: G16b Extractors - eBay |
yeah, no drama's oldmate. squirrel, i'll swing past your work about 2.30 tomorrow arvo with a 6'er of JD tins |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|