| auszookers.com http://auszookers.com/forum/ |
|
| Sierra front hub brass bush. http://auszookers.com/forum/viewtopic.php?f=5&t=32620 |
Page 1 of 1 |
| Author: | Deego [ Tue May 15, 2012 4:54 am ] |
| Post subject: | Sierra front hub brass bush. |
Do the sierras have a brash bush that holds the axle centeral |
|
| Author: | Fatzook [ Tue May 15, 2012 5:13 am ] |
| Post subject: | Re: Suzuki sierra diff |
There is one in the back of the hub spindle. I'm not sure that its purpose is to hold the axle central, but it does remove a little bit of float from the CV. |
|
| Author: | Deego [ Tue May 15, 2012 5:24 am ] |
| Post subject: | Re: Suzuki sierra diff |
I'm doing a complete overhaul in the front.just wondering should I replace that to |
|
| Author: | Fatzook [ Tue May 15, 2012 5:28 am ] |
| Post subject: | Re: Suzuki sierra diff |
Deego wrote: I'm doing a complete overhaul in the front.just wondering should I replace that to Nope. They don't wear out. I've never even heard of somone replacing one. Just do your inner oil seal, Felts, king pins, wheelbearings and dust seal, and re-grease your CV and locking hub assembly, and thats it. |
|
| Author: | BlueSuzy [ Tue May 15, 2012 9:10 am ] |
| Post subject: | Re: Suzuki sierra diff |
It seems the toyota guys change them because the axle seals must be abit shit. If the axle seal wont seal. This bush can be the problem. Im yet to change one. |
|
| Author: | Deego [ Tue May 15, 2012 9:23 am ] |
| Post subject: | Re: Suzuki sierra diff |
What is the name of them if I won't to get sone |
|
| Author: | BlueSuzy [ Tue May 15, 2012 10:49 am ] |
| Post subject: | Re: Suzuki sierra diff |
If you just explain where it is you should be able to order one. Swivel hub brass bush |
|
| Author: | 303zuke [ Wed May 16, 2012 11:23 am ] |
| Post subject: | Re: Sierra front hub brass bush. |
I don't think they're even available as a separate part, certainly not from Suzuki where it is an integral piece of the spindle. As others have said, I've never heard of anyone having to replace one because they flog out your axle seal. |
|
| Author: | zooky08 [ Wed May 16, 2012 12:09 pm ] |
| Post subject: | Re: Sierra front hub brass bush. |
Pretty sure you can't replace them. They are part of the spindle, so you would have to buy a new spindle hub. |
|
| Author: | BlueSuzy [ Wed May 16, 2012 1:30 pm ] |
| Post subject: | Re: Sierra front hub brass bush. |
The bush is brass/bronze, The knuckle/hub is not. So.. they are replaceable. Whether you can buy them or not is a different story. |
|
| Author: | want33s [ Wed May 16, 2012 2:05 pm ] |
| Post subject: | Re: Sierra front hub brass bush. |
BlueSuzy wrote: The bush is brass/bronze, The knuckle/hub is not. So.. they are replaceable. Whether you can buy them or not is a different story. /\ /\ X 2 I've never seen one that wasn't reuseable. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|