| auszookers.com http://auszookers.com/forum/ |
|
| how would YOU secure mud flaps to this? http://auszookers.com/forum/viewtopic.php?f=5&t=32676 |
Page 1 of 1 |
| Author: | suzukikid [ Thu May 17, 2012 10:00 am ] |
| Post subject: | how would YOU secure mud flaps to this? |
Hey all i have gone all grinder happy withthe rear of mine and made a tube bar put the led's in the back door......BUT How am i going to put mud flaps on it? Its just one of things the cops will pull ya over for and then go over the car......    I have a welder and stuff... chuck ya ideas out there! cheers |
|
| Author: | sogone [ Thu May 17, 2012 10:14 am ] |
| Post subject: | Re: how would YOU secure mud flaps to this? |
Bash 32NB pipe through the rear outrigger arm holder things like ya do to the front 'Shepped mod'. Cut the pipe so it's long enough to poke out both sides the width of your car. Attatch mud flaps to that. |
|
| Author: | Gwagensteve [ Thu May 17, 2012 10:37 am ] |
| Post subject: | Re: how would YOU secure mud flaps to this? |
sogone wrote: Bash 32NB pipe through the rear outrigger arm holder things like ya do to the front 'Shepped mod'. Cut the pipe so it's long enough to poke out both sides the width of your car. Attatch mud flaps to that. I wouldn't necessarily do it like that. 'd slide the tube in 4" or so from each side, then with a small tab on the tube going to one of the stock holes on the chassis near the shackle hanger, you can quickly slide the tube out and store the mudflaps in the back of the car so they don't get ripped up off road. We did this on the trolley tug. Steve |
|
| Author: | suzukikid [ Thu May 17, 2012 12:28 pm ] |
| Post subject: | Re: how would YOU secure mud flaps to this? |
you blokes are amazing! i got some of that in the shed too! cheers |
|
| Author: | suzukikid [ Thu May 17, 2012 1:15 pm ] |
| Post subject: | Re: how would YOU secure mud flaps to this? |
what do you know! its slides straight in! im gunna drill a hole through the whols lot and put a bolt through with a r clip on it....so i can just take the r clip out! cheers guys! |
|
| Author: | suzukikid [ Thu May 17, 2012 4:27 pm ] |
| Post subject: | Re: how would YOU secure mud flaps to this? |
All done! looks pretty gay but the tyres are covered for on road! incase anyone was wondering on how to do it(had a few PM's) i made a DIY thing in the fab bit! |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|