www.micoffroad.com will make up a front or a rear dif guard for you on request. They don't advertise it but they know how to make them.
Here's one of there's on my jimny, haven't got the rear guard
| auszookers.com http://auszookers.com/forum/ |
|
| Jimny Diff Guards ? http://auszookers.com/forum/viewtopic.php?f=5&t=34035 |
Page 1 of 1 |
| Author: | brindog [ Tue Jul 10, 2012 2:45 pm ] |
| Post subject: | Jimny Diff Guards ? |
Hi Guys Has anyone got a diff guard on there Jimny? I put a ding in the diff casing on the weekend, and don't want to do anymore damage and push the casing into the internals or pierce it. I was looking that the Sierra ones on LROR. These: http://www.lowrangeoffroad.com/index.ph ... -caps.html http://www.lowrangeoffroad.com/index.ph ... uards.html http://www.lowrangeoffroad.com/index.ph ... uards.html Just wondering if they would come in contact with anything such as panhard rods etc? and would they fit Jimnys?? Cheers |
|
| Author: | squibby [ Wed Jul 11, 2012 8:59 am ] |
| Post subject: | Re: Jimny Diff Guards ? |
www.micoffroad.com will make up a front or a rear dif guard for you on request. They don't advertise it but they know how to make them. Here's one of there's on my jimny, haven't got the rear guard
|
|
| Author: | Blakey [ Wed Jul 11, 2012 1:00 pm ] |
| Post subject: | Re: Jimny Diff Guards ? |
looks like thoes MIC ones would collect allot of crap, Offroad armory make some weld on ones. that are resonably cheap. otherwise zanfi.it make some as well but they are really expensive. http://www.offroad-armory.com/jimnyaxle.html http://www.zanfi.it/modules.php?name=ca ... ts_id=1164 http://www.zanfi.it/modules.php?name=ca ... ts_id=1700 http://www.zanfi.it/modules.php?name=ca ... ts_id=1873 http://www.zanfi.it/modules.php?name=ca ... ts_id=1165 |
|
| Author: | brindog [ Thu Jul 12, 2012 7:38 am ] |
| Post subject: | Re: Jimny Diff Guards ? |
Squibby thanks for that, but I'm more keen for a weld on piece. Those ones from italy look good, but they would be way over priced once shipped. So does any know if the Sierra and Jimny have the same size pumpkin? |
|
| Author: | Blakey [ Thu Jul 12, 2012 2:36 pm ] |
| Post subject: | Re: Jimny Diff Guards ? |
brindog wrote: Squibby thanks for that, but I'm more keen for a weld on piece. Those ones from italy look good, but they would be way over priced once shipped. So does any know if the Sierra and Jimny have the same size pumpkin? i belive they are the same size. but if all else fails just buy some steel plate, and make your own? if you have the tools. |
|
| Author: | brindog [ Thu Jul 12, 2012 4:50 pm ] |
| Post subject: | Re: Jimny Diff Guards ? |
Cheers Blakey, think I'll do that. |
|
| Author: | dougies_tx5turbo [ Thu Jul 12, 2012 5:22 pm ] |
| Post subject: | Re: Jimny Diff Guards ? |
brindog wrote: So does any know if the Sierra and Jimny have the same size pumpkin? Mate the front is much smaller than the rear. I would like to think the rear is the same Size as sierra and but the front there is no way it's the same. Not 100% sue on the rear. Doug |
|
| Author: | monley [ Fri Jul 13, 2012 9:47 pm ] |
| Post subject: | Re: Jimny Diff Guards ? |
I had the ora ones...they were great 
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|