| auszookers.com http://auszookers.com/forum/ |
|
| Rim to flare measurement thread-standard and suspension lift http://auszookers.com/forum/viewtopic.php?f=5&t=34160 |
Page 1 of 1 |
| Author: | bigrig91 [ Sat Jul 14, 2012 5:15 pm ] |
| Post subject: | Rim to flare measurement thread-standard and suspension lift |
Hey guys, would like to get the measurements of a 2.0l lwb vitara standard suspension height for myself but thought it would be good to incorporate a thread for all suzukis. Mention what car, where u measured from, (preffered being from the bottom of the rim to the flare in a straight vertical line), what size the rim is (not sure if this matters) and suspension lift if any. Maybe even age of lift if u think its sagged. I am unsure of the height of my suspension at this stage so i cant start the thread off with anything usefull. Hopefully someone else can help me out!!! !Camo1 will never be finished!
|
|
| Author: | boostedbrick [ Sat Jul 14, 2012 5:57 pm ] |
| Post subject: | Re: Rim to flare measurement thread-standard and suspension |
We have a thread like this over here viewtopic.php?f=5&t=24061 Bottom of rim to flare would change depending on rim/flare type... /edit, looks like some posts are missing from that thread but still allot of info in there.. |
|
| Author: | bigrig91 [ Sat Jul 14, 2012 5:58 pm ] |
| Post subject: | Re: Rim to flare measurement thread-standard and suspension |
Thats what i was looking for. Maybe someone should start a how to search thread.......... |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|