| auszookers.com http://auszookers.com/forum/ |
|
| tank lift http://auszookers.com/forum/viewtopic.php?f=5&t=34234 |
Page 1 of 1 |
| Author: | KEENSY85 [ Mon Jul 16, 2012 9:15 pm ] |
| Post subject: | tank lift |
can any one suggest any links to lifting the fuel tank even moving back a little iv been looking at it and i can think of a couple of ways but just thought id ask |
|
| Author: | Fatzook [ Mon Jul 16, 2012 10:10 pm ] |
| Post subject: | Re: tank lift |
In a sierra? You'll have to lift it atleast 100mm so that the filler neck clears the top of the chassis rail. This means chopping out your floor in the back. As for moving it back.....not without a chassis extension. Its hard up against the rear crossmember. Just buy or make a tank guard. Its far less work. |
|
| Author: | atari4x4 [ Mon Jul 16, 2012 10:18 pm ] |
| Post subject: | Re: tank lift |
Fatzook wrote: Just buy or make a tank guard. Its far less work. viewtopic.php?f=15&t=13126 |
|
| Author: | DarkHorse [ Mon Jul 16, 2012 10:22 pm ] |
| Post subject: | Re: tank lift |
| Author: | Fatzook [ Mon Jul 16, 2012 10:29 pm ] |
| Post subject: | Re: tank lift |
DarkHorse wrote: :rofl: nice... teamwork so it's not a shameless self-plug I did give him the option of making one
|
|
| Author: | atari4x4 [ Mon Jul 16, 2012 11:55 pm ] |
| Post subject: | Re: tank lift |
DarkHorse wrote: :rofl: nice... teamwork so it's not a shameless self-plug do i get a cut if he makes a sale? |
|
| Author: | just_cruizin [ Tue Jul 17, 2012 7:27 am ] |
| Post subject: | Re: tank lift |
atari4x4 wrote: DarkHorse wrote: :rofl: nice... teamwork so it's not a shameless self-plug do i get a cut if he makes a sale? Damn EMO, You're so 2008 |
|
| Author: | boostedbrick [ Tue Jul 17, 2012 11:38 am ] |
| Post subject: | Re: tank lift |
I run a 2" body lift with a 2" tank lift. The tank sits hard against the left chassis rail. There is plenty of room to fit a hose off the inlet. |
|
| Author: | Fatzook [ Tue Jul 17, 2012 11:55 am ] |
| Post subject: | Re: tank lift |
Pics? |
|
| Author: | tanshi [ Tue Jul 17, 2012 11:58 am ] |
| Post subject: | Re: tank lift |
I did similar I my sierra but I ran a vitara tank and body lift |
|
| Author: | boostedbrick [ Tue Jul 17, 2012 12:18 pm ] |
| Post subject: | Re: tank lift |
Pics on pg9 of my build thread. Cant link them off my phone. |
|
| Author: | stewy91 [ Tue Jul 17, 2012 1:22 pm ] |
| Post subject: | Re: tank lift |
Here's the link I have to agree with the tank guard its much easier and some have to get exhaust moved. viewtopic.php?f=4&t=13496&hilit=boostedbrick&start=240 |
|
| Author: | KEENSY85 [ Tue Jul 17, 2012 1:35 pm ] |
| Post subject: | Re: tank lift |
in my last sierra i had a 2 inch body lift and the tank was lifted like 200 or 300 ish mm they had just fliped the mounting brakets |
|
| Author: | KEENSY85 [ Tue Jul 17, 2012 1:36 pm ] |
| Post subject: | Re: tank lift |
my current is a a soft top im thinking i might just remake 1 |
|
| Author: | KEENSY85 [ Tue Jul 17, 2012 1:36 pm ] |
| Post subject: | Re: tank lift |
boostedbrick wrote: I run a 2" body lift with a 2" tank lift. The tank sits hard against the left chassis rail. There is plenty of room to fit a hose off the inlet. pics X2 |
|
| Author: | Fatzook [ Tue Jul 17, 2012 2:31 pm ] |
| Post subject: | Re: tank lift |
boostedbrick wrote: Pics on pg9 of my build thread. Cant link them off my phone. Where did you run your exhaust? |
|
| Author: | boostedbrick [ Tue Jul 17, 2012 3:31 pm ] |
| Post subject: | Re: tank lift |
Ill drag some pics out tonight. There was plenty of room. |
|
| Author: | Fatzook [ Tue Jul 17, 2012 5:16 pm ] |
| Post subject: | Re: tank lift |
Well unless the OP has a B/L, the point is moot. If you were stuffing around with the tank mounts etc, you may aswell fit a larger tank from another vehicle. Atleast you will gain something for all your efforts. |
|
| Author: | boostedbrick [ Tue Jul 17, 2012 6:09 pm ] |
| Post subject: | Re: tank lift |
Doesn't look like I actually took any photos of it in place... But to give you an idea, this is what was fitted in there But yes, without a body lift this would not work. I didnt really have a choice, with the suspension in the rear i couldn't use the stock location. ![]()
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|