| auszookers.com http://auszookers.com/forum/ |
|
| Where do you find 50mm hub nut socket? http://auszookers.com/forum/viewtopic.php?f=5&t=34693 |
Page 1 of 1 |
| Author: | jmd-247 [ Fri Aug 03, 2012 12:37 pm ] |
| Post subject: | Where do you find 50mm hub nut socket? |
I am rebuilding a front did housing. So new everything. Stripping it down to pull cv's and need a 50 mm deep socket or tube spanner for bearing retainer bolt. Have been to every tool and supplies store I no around where I live and cannot get one! I have a 50 mm socket but spline hits it before It reaches the nut. Help greatly appreciated!! Josh. |
|
| Author: | Rusho [ Fri Aug 03, 2012 12:43 pm ] |
| Post subject: | Re: What do u use. Where do u find it. |
eBay
|
|
| Author: | jmd-247 [ Fri Aug 03, 2012 1:01 pm ] |
| Post subject: | Re: What do u use. Where do u find it. |
I just got a 55mm tube spanner. I got some 1mm sheet I can line it with if it's too sloppy! Desperate hahaha |
|
| Author: | abclarke [ Fri Aug 03, 2012 1:12 pm ] |
| Post subject: | Re: What do u use. Where do u find it. |
jmd-247 wrote: I am rebuilding a front did housing. So new everything. Stripping it down to pull cv's and need a 50 mm deep socket or tube spanner for bearing retainer bolt. Have been to every tool and supplies store I no around where I live and cannot get one! I have a 50 mm socket but spline hits it before It reaches the nut. Help greatly appreciated!! Josh. If your keen to come grab it you can borrow the one i used on mine? For a sierra yeah? |
|
| Author: | shep [ Fri Aug 03, 2012 1:58 pm ] |
| Post subject: | Re: What do u use. Where do u find it. |
Got mine from lowrange, wish I could remember who I lent it to |
|
| Author: | sideways [ Fri Aug 03, 2012 2:46 pm ] |
| Post subject: | Re: What do u use. Where do u find it. |
shep wrote: wish I could remember who I lent it to |
|
| Author: | just_cruizin [ Fri Aug 03, 2012 3:16 pm ] |
| Post subject: | Re: What do u use. Where do u find it. |
Screw driver and hammer. |
|
| Author: | jmd-247 [ Fri Aug 03, 2012 3:37 pm ] |
| Post subject: | Re: What do u use. Where do u find it. |
Well the 55 worked fine with a bit of rag in there! Thanks for the offers though. Really appreciate it! |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|