auszookers.com
http://auszookers.com/forum/

Engine Weights J20a - H20a
http://auszookers.com/forum/viewtopic.php?f=5&t=34709		 Page 1 of 1
Author:  atari4x4 [ Fri Aug 03, 2012 8:05 pm ]
Post subject:  Engine Weights J20a - H20a
Good Evening Ladies & Gentlemen of Auszookers,

Just wonder if any of you good people out there know the difference in engine weight between the J20a & H20a's?

Kind Regards,

Mr 4x4
Author:  ninjamoses [ Fri Aug 03, 2012 8:21 pm ]
Post subject:  Re: Engine Weights J20a - H20a
Specifications on carpoint says the kerb weight for a 2003 SQ420 manual is supposedly 1360kg versus 1405kg for a 2003 SQ625 manual.
Author:  atari4x4 [ Fri Aug 03, 2012 8:32 pm ]
Post subject:  Re: Engine Weights J20a - H20a
45kgs difference between engines seems about right considering how much more crap there is in a DOHC V6 compared to a DOHC 4cyl.
Author:  want33s [ Fri Aug 03, 2012 8:46 pm ]
Post subject:  Re: Engine Weights J20a - H20a
:shocked: A V6 weighs a 1.3 more than a 2.0 4 cyl..? 8O
Author:  atari4x4 [ Fri Aug 03, 2012 8:48 pm ]
Post subject:  Re: Engine Weights J20a - H20a
i've got NFI jas, don't forget it's got 2 heads just like jonno_racing. :lol:
Author:  Fatzook [ Fri Aug 03, 2012 10:25 pm ]
Post subject:  Re: Engine Weights J20a - H20a
I can pick up a J20. I'd be suprised if the H20 weight over 20kgs more....
Author:  ninjamoses [ Fri Aug 03, 2012 10:49 pm ]
Post subject:  Re: Engine Weights J20a - H20a
The SQ625 would have the steel front diff where the SQ420 wouldn't, so that probably counts for a good 10kg on its own. I'd imagine the heavy stock exhaust manifolds & y-pipe would be a good 5+ kilos more than the J20A version also.
Author:  fordem [ Sat Aug 04, 2012 1:03 am ]
Post subject:  Re: Engine Weights J20a - H20a
The 2000 GV owner's manual I have lists the weights as 1300~1370kg for the 2.0 and 1390~1450kg for the 2.5 - quite a bit more than the 45kg difference mentioned earlier.
Author:  bigrig91 [ Sat Aug 04, 2012 4:38 pm ]
Post subject:  Re: Engine Weights J20a - H20a
h20 is a two man lift. j20 a one man. the difference between a h20 and h25 is nothing though. :) DO it
Author:  atari4x4 [ Sat Aug 04, 2012 5:24 pm ]
Post subject:  Re: Engine Weights J20a - H20a
the H25a will end up in there eventually, but hopefully not too soon with only 85k on the clock.

i'm trying to work out if my calmini 2.5" GV front springs are going to hold up to the extra weight of the H20a compared to the J20a.
Author:  bigrig91 [ Sat Aug 04, 2012 5:32 pm ]
Post subject:  Re: Engine Weights J20a - H20a
I would think so because they are designed for a gv arent they?

Being calmini who would know though.
Author:  tombutt [ Sat Aug 04, 2012 8:08 pm ]
Post subject:  Re: Engine Weights J20a - H20a
Give it a shot but who knows as said I've got my eye on 40mm gv springs think will give around 2.5 of lift hopefully atleast that's going off the ome catalogue
Author:  Brett [ Sun Jun 02, 2013 4:20 pm ]
Post subject:  Re: Engine Weights J20a - H20a
So did any one every find out the weight?
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/