| auszookers.com http://auszookers.com/forum/ |
|
| Engine mounts http://auszookers.com/forum/viewtopic.php?f=5&t=35274 |
Page 1 of 1 |
| Author: | Zuzukie [ Sun Aug 26, 2012 5:36 pm ] |
| Post subject: | Engine mounts |
Trying to fit my g13a into my 82 nt zook Just wondering if the engine mounts in a nt and wt with a 1.3 engine are the same size and design Are the engine mounts on the chassis the same size and design or are they different Just need somethin to help me fit in the 1.3 g13a into an 82 nt that had a 1ltr f10a engine in it |
|
| Author: | Gwagensteve [ Sun Aug 26, 2012 5:51 pm ] |
| Post subject: | Re: Engine mounts |
WT and NT are the same, engine mount wise. Steve |
|
| Author: | Zuzukie [ Sun Aug 26, 2012 6:01 pm ] |
| Post subject: | Re: Engine mounts |
Okay then Is there a size difference between 1.3 and 1ltr mounts |
|
| Author: | Gwagensteve [ Sun Aug 26, 2012 6:13 pm ] |
| Post subject: | Re: Engine mounts |
Not as far as I am aware - the rubber mount is physically the same. Steve. |
|
| Author: | Zuzukie [ Sun Aug 26, 2012 6:17 pm ] |
| Post subject: | Re: Engine mounts |
Is there any difference in the frame pieces that connect it from the chassis to the block |
|
| Author: | Mickc [ Sun Aug 26, 2012 6:21 pm ] |
| Post subject: | Re: Engine mounts |
the mounts on the chassis are in different though. Shape as well as position. is that way U asking? |
|
| Author: | Zuzukie [ Sun Aug 26, 2012 6:29 pm ] |
| Post subject: | Re: Engine mounts |
Yeah cause ive got the engine sitting in the bay but its about 30-40mm off the mount but not sure if theyre out of a wt or nt and if theyre for a 1.3 or a 1 ltr And trying to avoid fabbin up new mounts |
|
| Author: | Mickc [ Sun Aug 26, 2012 6:48 pm ] |
| Post subject: | Re: Engine mounts |
See build threads on G16 engine conversion for Sierra utes or maruti. Pics of one liter chassis with 1.3 mounts welded on. Have seen some very doggy adapter plates to use existing chassis mounts but your mod plate engineer will not pass it |
|
| Author: | Gwagensteve [ Sun Aug 26, 2012 6:54 pm ] |
| Post subject: | Re: Engine mounts |
This is going to take a very long time if you ask one question at a time. The rubber mount is the same WT/NT/1.0 The engine side brackets are completely different between 1.0 and 1.3 The chassis brackets are completely different between 1.0 and 1.3. It is possible to make adapter plates to make the 1.0 chassis brackets work with a 1.3 engine, but they are quite large brackets. I helped Christover with this many years ago. Steve. |
|
| Author: | Zuzukie [ Sun Aug 26, 2012 7:08 pm ] |
| Post subject: | Re: Engine mounts |
Thanks for that ill look into it see if i can find some build threads with conversions done or try nd get some chassis brackets |
|
| Author: | Mickc [ Sun Aug 26, 2012 8:22 pm ] |
| Post subject: | Re: Engine mounts |
Zuzukie, is it a 82 tub and chassis? Wat gearbox are U using? 5 speed 1.3? will it fit in tunnel and mounts ok? |
|
| Author: | Zuzukie [ Mon Aug 27, 2012 9:19 am ] |
| Post subject: | Re: Engine mounts |
Its an 82 swb tub is seperate from the chassis (just bolts down) Had a f10a 4 speed in it but putting in g13a 5 speed Gearbox fits in the tunnel but mount need mods done |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|