auszookers.com
http://auszookers.com/forum/

Vit 4 speed kickdown cable
http://auszookers.com/forum/viewtopic.php?f=5&t=35301		 Page 1 of 1
Author:  Vits93 [ Mon Aug 27, 2012 5:25 pm ]
Post subject:  Vit 4 speed kickdown cable
Has anyone replaced or had anything to do with the kickdown/gearbox throttle cable?
Author:  Fatzook [ Mon Aug 27, 2012 5:32 pm ]
Post subject:  Re: Vit 4 speed kickdown cable
Is there a question behind your question?

I've removed and refitted one, but not sure where you are going with this so thats as much help as I can be for the moment...
Author:  Vits93 [ Mon Aug 27, 2012 5:44 pm ]
Post subject:  Re: Vit 4 speed kickdown cable
Fatzook wrote:
Is there a question behind your question?

I've removed and refitted one, but not sure where you are going with this so thats as much help as I can be for the moment...


Sorry long day at work :oops: . How easy it is to replace and what i have to do to remove it? Mine is seized i cant move it by hand or with it connected to the throttle body.
Author:  Fatzook [ Mon Aug 27, 2012 9:16 pm ]
Post subject:  Re: Vit 4 speed kickdown cable
Same sort of thing as an accelerator cable. Just undo both ends, fit the new one ( if you can find one.....) and carry on :wink:
Author:  Vits93 [ Mon Aug 27, 2012 10:13 pm ]
Post subject:  Re: Vit 4 speed kickdown cable
Thanks fatzook. Is it attached to the valve body as well?
Author:  Fatzook [ Mon Aug 27, 2012 10:20 pm ]
Post subject:  Re: Vit 4 speed kickdown cable
Image
Author:  Fatzook [ Mon Aug 27, 2012 10:22 pm ]
Post subject:  Re: Vit 4 speed kickdown cable
Just disconnect both ends, and any cable clamps etc and it will come free. In the above pic, you can see it looped up on top of the box.
Author:  Vits93 [ Tue Aug 28, 2012 7:01 pm ]
Post subject:  Re: Vit 4 speed kickdown cable
Thanks again Fatzook
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/