| auszookers.com http://auszookers.com/forum/ |
|
| some help with suspension lift http://auszookers.com/forum/viewtopic.php?f=5&t=35364 |
Page 1 of 1 |
| Author: | lil monster [ Wed Aug 29, 2012 8:43 pm ] |
| Post subject: | some help with suspension lift |
Howdy, I'm a complete noob when it comes to the mechanical side of a vehicle, I'm slowly learning but need some advice, I have a 1995 vitara swb. I have fitted a 1.5 inch lift but I want MORE  so I'm looking at 30 mm spacers, I'm just woundering what needs to be done to make this work as in break lines and all that important stuff. Thanks in advance 
|
|
| Author: | atari4x4 [ Wed Aug 29, 2012 9:17 pm ] |
| Post subject: | Re: some help with suspension lift |
extended brake lines are a good idea, i use Power Brakes SA ideally you'd want longer struts & shocks at a minimum, maybe strut flip/spacer & a rear ball joint spacer & diff drop brackets. check out bits4vits for vitara parts. |
|
| Author: | lil monster [ Wed Aug 29, 2012 9:45 pm ] |
| Post subject: | Re: some help with suspension lift |
Ahh sweet will have a look at what they have to offer
|
|
| Author: | Charlie Brown [ Thu Aug 30, 2012 4:42 pm ] |
| Post subject: | Re: some help with suspension lift |
yeah man I just bought: spring spacers, shock spacers, rear arm axel spacer, a prop spacer and some strut mount flip bolts from bits for vits and it arrived yesterday to put over my 1.5" lift as well =P have a look at what this guy did cos thats pretty much what im doing without as bigger spacers:http://www.auszookers.com/forum/viewtopic.php?f=4&t=9990&hilit=christover&start=210 scroll down and have a read it helped me make up my mind of what I was going to do =P |
|
| Author: | lil monster [ Fri Aug 31, 2012 8:48 am ] |
| Post subject: | Re: some help with suspension lift |
Ahh sweet thanks, iv been following ya thread  its what I want
|
|
| Author: | Charlie Brown [ Fri Aug 31, 2012 11:03 am ] |
| Post subject: | Re: some help with suspension lift |
Sweet mate ill let u know how my install goes 
|
|
| Author: | lil monster [ Fri Aug 31, 2012 11:34 am ] |
| Post subject: | Re: some help with suspension lift |
Ordered spacers atm only gonna do reads so it levels the car out at a solid 2 inch lift, wanna do bigger tyres and then see if I need to go higher |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|