| auszookers.com http://auszookers.com/forum/ |
|
| flexy brake lines to the Master cyl http://auszookers.com/forum/viewtopic.php?f=5&t=35369 |
Page 1 of 1 |
| Author: | tanshi [ Thu Aug 30, 2012 11:05 am ] |
| Post subject: | flexy brake lines to the Master cyl |
just stiing here at work thinking about how best to hook up my brakes on the 81. Im wondering if its a good/bad/whocares idea to use flexy lines with banjo fittings to run from the front brake block (splitter) to the Master cyl ports rather than the hard lines that are standard. I dont have a huge amount of room between the plennum of the J20 and the MC and flexys would make the job alot easier. thoughts? |
|
| Author: | atari4x4 [ Thu Aug 30, 2012 11:41 am ] |
| Post subject: | Re: flexy brake lines to the Master cyl |
can't see why not, i've seen cars built with full length braided lines running to the rear instead of hard lines. |
|
| Author: | tanshi [ Thu Aug 30, 2012 11:42 am ] |
| Post subject: | Re: flexy brake lines to the Master cyl |
I figured braided would be the way to go. I'll have to check and see what i can get or get made up |
|
| Author: | atari4x4 [ Thu Aug 30, 2012 11:47 am ] |
| Post subject: | Re: flexy brake lines to the Master cyl |
i know they're in SA, but these guys are simply awesome when it comes to all thing brakes, basically if they can't do it... it can't be done. http://www.powerbrakes.com.au/ |
|
| Author: | BlueSuzy [ Thu Aug 30, 2012 12:04 pm ] |
| Post subject: | Re: flexy brake lines to the Master cyl |
Is there room on the other side? Might be worth hunting for a master with ports on the other side? |
|
| Author: | tanshi [ Thu Aug 30, 2012 12:06 pm ] |
| Post subject: | Re: flexy brake lines to the Master cyl |
plenty of room on the other side. maybe a sidekick one from the US. hmmmm |
|
| Author: | BlueSuzy [ Thu Aug 30, 2012 3:07 pm ] |
| Post subject: | Re: flexy brake lines to the Master cyl |
Various hilux's are on the other side. 4 stud pattern though(redrillable) and would have to work out valving sizes http://www.ebay.com.au/itm/Brake-Master ... 5d33b2724c |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|