| auszookers.com http://auszookers.com/forum/ |
|
| Where to get Rubber Caster Correction Bushes?? http://auszookers.com/forum/viewtopic.php?f=5&t=35374 |
Page 1 of 1 |
| Author: | Ride [ Thu Aug 30, 2012 3:48 pm ] |
| Post subject: | Where to get Rubber Caster Correction Bushes?? |
Hey, Anybody know where to get 2.5 degree rubber caster correction bushes localy? If I can't get those il probably get the PollyTuff ones, anyone know if these are any good or have any other suggestions? Thanks. |
|
| Author: | zooky08 [ Thu Aug 30, 2012 4:35 pm ] |
| Post subject: | Re: Where to get Rubber Caster Correction Bushes?? |
Tough dog sells castor bushes a jimny |
|
| Author: | speedyblue [ Thu Aug 30, 2012 5:30 pm ] |
| Post subject: | Re: Where to get Rubber Caster Correction Bushes?? |
Super pro poly bushes are good stuff. I have a full set in my landy. They are very soft, more-so than rubber ones, but will outlast the rubber bushes easily. Not all poly bushes are rock hard articulation reducing chunks of plastic that crumble after 6 months. |
|
| Author: | BlueSuzy [ Thu Aug 30, 2012 5:35 pm ] |
| Post subject: | Re: Where to get Rubber Caster Correction Bushes?? |
My super pro's for my leafs were shit. I went back to my second hand rubbers.. They ovaled out and then were sloppy |
|
| Author: | Fatzook [ Thu Aug 30, 2012 6:09 pm ] |
| Post subject: | Re: Where to get Rubber Caster Correction Bushes?? |
I can supply castor bushes for Jimny. I have a set here that I can post to you. They use an offset drilled crush tube, rather than an offset hole through the bush, so will last longer. |
|
| Author: | Ride [ Thu Aug 30, 2012 6:53 pm ] |
| Post subject: | Re: Where to get Rubber Caster Correction Bushes?? |
Thanks fatzook, That sounds alright PM me with details if you want. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|