| auszookers.com http://auszookers.com/forum/ |
|
| g16b conversion http://auszookers.com/forum/viewtopic.php?f=5&t=35433 |
Page 1 of 1 |
| Author: | russty_2008 [ Sun Sep 02, 2012 6:05 pm ] |
| Post subject: | g16b conversion |
ive just bought a swb nt 86 sierra with an efi vitara engine and i need a new throttle cable is there one i can buy and just throw in or do i have to do some fabbing to fit a new one cheers |
|
| Author: | Gwagensteve [ Sun Sep 02, 2012 6:22 pm ] |
| Post subject: | Re: g16b conversion |
Depends what cable it was made to work with. I think the stock vitara cable is too short for a sierra. I have a swift cable in mine, but that required modification to the accelerator pedal. Steve. |
|
| Author: | boostedbrick [ Sun Sep 02, 2012 6:27 pm ] |
| Post subject: | Re: g16b conversion |
AFAIK stock cables wont work. I'm using a camry cable, I think it was a 3rd gen. Corrolla and Celica's of the same era use the same type of cable, only the length differs. Will require two mounting screws/bolts on the fire wall. |
|
| Author: | reeceh [ Sun Sep 02, 2012 8:27 pm ] |
| Post subject: | Re: g16b conversion |
I have a 91 Sierra swb with g16b vitara. I run the vitara cable. At the pedal side I just put the cable through the fork and crimped the shit out of it. Works fine. Some people drill the end and bolt it. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|