| auszookers.com http://auszookers.com/forum/ |
|
| Dual battery http://auszookers.com/forum/viewtopic.php?f=5&t=36034 |
Page 1 of 1 |
| Author: | Zuzukie [ Fri Sep 28, 2012 9:27 pm ] |
| Post subject: | Dual battery |
Heya Wanting to install a dual battery system into my 93 wt but not 100% sure on how to install it Just want to do a cheap and basic setup Car has had an upgraded alternator but not sure what alternator has been installed Any ideas or suggestions will be a great help |
|
| Author: | rhino85 [ Fri Sep 28, 2012 9:37 pm ] |
| Post subject: | Re: Dual battery |
I'm not an expert but I have an in line dual battery set up which uses no isolator or switch just a second battery on the other side of the engine bay and big fat dual battery cables running between terminals and hasn't given me any grief and works well for the winch and other accessories |
|
| Author: | shep [ Fri Sep 28, 2012 9:58 pm ] |
| Post subject: | Re: Dual battery |
This is what I did viewtopic.php?f=5&t=4891&hilit=Second+battery |
|
| Author: | Dec [ Fri Sep 28, 2012 10:34 pm ] |
| Post subject: | Re: Dual battery |
Hey mate, this may interest you in a cheap easy do it yourself duel battery tray I first purchased one of these http://www.supercheapauto.com.au/online ... escription I used the lid only as it is the perfect width of a 58 Century battery, i then simply got a pair of tin snips and rubber mallet and cut the size i wanted and hammered the corners and pot-riveted it all together. Hope that helps |
|
| Author: | jimny_timmy [ Sat Sep 29, 2012 5:37 am ] |
| Post subject: | Re: Dual battery |
There's redarc isolators on eBay for reasonably cheap... I think I have a spare one liking around here if you're interested? |
|
| Author: | Gough [ Sun Sep 30, 2012 7:22 am ] |
| Post subject: | Re: Dual battery |
Nice work |
|
| Author: | Zuzukie [ Sun Sep 30, 2012 9:02 am ] |
| Post subject: | Re: Dual battery |
Got some ideas now So do i need to join both terminals on both batteries or can i just connect the positive terminals nd earth out the second battery to a spot on the body Ive got a tray from super not so cheap at all just gotta get some cable Does it work better with an isolator switch nd is it needed |
|
| Author: | fordem [ Mon Oct 01, 2012 2:15 am ] |
| Post subject: | Re: Dual battery |
How you wire depends on why you're adding the second battery. The primary reason to add a second battery is for additional capacity, some people want to use that capacity for longer run time - fridges, etc - with the engine off, and to avoid draining the cranking battery - in which case an isolator is needed - other people want to use that capacity to provide greater current for winching etc., - in which case you can just parallel them. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|