auszookers.com
http://auszookers.com/forum/

Starter motor change over in Sierra ???
http://auszookers.com/forum/viewtopic.php?f=5&t=36170		 Page 1 of 1
Author:  buzbox [ Sat Oct 06, 2012 12:24 pm ]
Post subject:  Starter motor change over in Sierra ???
The starter motor in my '91 G13BA carby leafy Sierra was starting to play up so I ordered a replacement. Gave him the details and it arrived that arvo, sweet. Just pulled mine out and it's different even though the listing for it is correct.

A quick scan of ebay I found the one that is practically the same but it's to suit Vitara.. Lucky I have one here and is only a few month old :)

But was there a change over or something?

Left is Vitara (g16b), Middle Sierra, Right replacement for Sierra.

Image

Image
Author:  Ridge [ Sat Oct 06, 2012 12:50 pm ]
Post subject:  Re: Starter motor change over in Sierra ???
I have one of the ebay starters motors too. I thought there would be a problem when i compared it to the old one, but so far there have been no problems.
The add pretty much describes it as being a multi fit item.
Author:  BlueSuzy [ Sat Oct 06, 2012 1:28 pm ]
Post subject:  Re: Starter motor change over in Sierra ???
You should of just got a cheap second handy !

Many type cars fit. Mitsubishi!
Author:  buzbox [ Sat Oct 06, 2012 1:55 pm ]
Post subject:  Re: Starter motor change over in Sierra ???
The replacement I got was from my local auto elecy. I did think about getting a second hander, but really, you don't know when it will die and it's not one of the best jobs to do just to keep replacing them.

The main issue I found was with the mounting holes. The top bolt needs to be a straight through bolt, the bottom one is threaded into the block, the replacement I have are threaded and seem to be in a different location. The other difference is the length of the starter itself.

I've just put in the one out of my Vit and all good :D
Author:  KEENSY85 [ Mon Oct 08, 2012 8:58 am ]
Post subject:  Re: Starter motor change over in Sierra ???
I ran a g 1.6 starter on my g13ba
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/