Mine, too, only one wire into a 4pin plug.
Guess thats the plugs they had on hand
| auszookers.com http://auszookers.com/forum/ |
|
| G16b 02 sensor http://auszookers.com/forum/viewtopic.php?f=5&t=36213 |
Page 1 of 1 |
| Author: | shep [ Mon Oct 08, 2012 5:33 pm ] |
| Post subject: | G16b 02 sensor |
The vitara that I am robbing bits from for my Sierra has headers with a single wire 02 sensor, the plug looks like it should be a 4 wire 02 sensor. The single wire is dodgly joined to the loom behind the plug. Should I get a new 4 wire sensor or will the single wire jobbie be ok? |
|
| Author: | Fatzook [ Mon Oct 08, 2012 5:39 pm ] |
| Post subject: | Re: G16b 02 sensor |
4 wire is a heated sensor. 5 times the price, and does the same thing once the motor is up to temp. |
|
| Author: | BlueSuzy [ Mon Oct 08, 2012 6:00 pm ] |
| Post subject: | Re: G16b 02 sensor |
My balenos G16b's have been 4pin plug. 1 wire oxy sensor. |
|
| Author: | shep [ Mon Oct 08, 2012 6:24 pm ] |
| Post subject: | Re: G16b 02 sensor |
So it won't affect how it runs? |
|
| Author: | Fatzook [ Mon Oct 08, 2012 6:35 pm ] |
| Post subject: | Re: G16b 02 sensor |
shep wrote: So it won't affect how it runs? Nope. |
|
| Author: | Rossco [ Mon Oct 08, 2012 6:57 pm ] |
| Post subject: | Re: G16b 02 sensor |
I have the same style g16b as your using shep and mines four pin plug with only the one black wire running to the extractors |
|
| Author: | DarkHorse [ Mon Oct 08, 2012 9:12 pm ] |
| Post subject: | Re: G16b 02 sensor |
+1 wot them sed. |
|
| Author: | christover1 [ Tue Oct 09, 2012 6:37 am ] |
| Post subject: | Re: G16b 02 sensor |
Mine, too, only one wire into a 4pin plug. Guess thats the plugs they had on hand
|
|
| Author: | shep [ Tue Oct 09, 2012 6:42 am ] |
| Post subject: | Re: G16b 02 sensor |
christover1 wrote: Mine, too, only one wire into a 4pin plug. Guess thats the plugs they had on hand Mine has had a wire cut from the plug and the sensor wire is attached with something similar to a scotch lock. Def not factory |
|
| Author: | Fatzook [ Tue Oct 09, 2012 8:09 am ] |
| Post subject: | Re: G16b 02 sensor |
I think the 4 wire O2 sensor was for north America and Europe. Not sure I've seen an Aussie delivered G16 with a 4 wire.... I'd say that your scotch locked wire was broken at some point. That, or the O2 sensor is from another vehicle, and it was easier to butcher the wire than swap the plug or pin over. |
|
| Author: | DarkHorse [ Tue Oct 09, 2012 10:11 am ] |
| Post subject: | Re: G16b 02 sensor |
Aftermarket sensors don't come with the plug, so easier to cut the old wire and tap in. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|