auszookers.com
http://auszookers.com/forum/

Jimny Rims on a Vitara??
http://auszookers.com/forum/viewtopic.php?f=5&t=36744
Page 1 of 2

Author:  suzukiboy [ Mon Oct 29, 2012 7:18 pm ]
Post subject:  Jimny Rims on a Vitara??

Will Jimny Rims fit a 1995 Vitara?

Author:  zukenutter [ Mon Oct 29, 2012 7:36 pm ]
Post subject:  Re: Jimny Rims on a Vitara??

Yes, and will give a wider wheel track.
Not sure of what tyre size will work but I'm sure the Vit guys will chime in with an answer.

Author:  DarkHorse [ Wed Oct 31, 2012 10:19 pm ]
Post subject:  Re: Jimny Rims on a Vitara??

I carried one as a spare for a while when I first got the Vit, but don't remember what the offset was.

Bolt pattern and centre bore are fine.

Tyre wise (without having the offsets to compare) anything up to a 235/75/15 should be relatively painless with the normal aftermarket 30-40mm suspension lift.

Author:  BlueSuzy [ Wed Oct 31, 2012 11:05 pm ]
Post subject:  Re: Jimny Rims on a Vitara??

Jim stock steelies are -10
Leaf Sierra stock steelies are -5

Vit rims have to be 0 or + something. More inset.

Author:  atari4x4 [ Wed Oct 31, 2012 11:12 pm ]
Post subject:  Re: Jimny Rims on a Vitara??

+25 for 15x5.5 vit stockies from memory

Author:  zukenutter [ Thu Nov 01, 2012 6:42 am ]
Post subject:  Re: Jimny Rims on a Vitara??

BlueSuzy wrote:
Jim stock steelies are -10
Leaf Sierra stock steelies are -5


Vit rims have to be 0 or + something. More inset.



I have always assumes they were the same :o

Author:  suzukiboy [ Thu Nov 01, 2012 7:25 am ]
Post subject:  Re: Jimny Rims on a Vitara??

BlueSuzy wrote:
Jim stock steelies are -10
Leaf Sierra stock steelies are -5

Vit rims have to be 0 or + something. More inset.


Cheers,

I have a set of Jimny rims coming soon but thinking about fitting to my Sierrra now.




I have a set of 15x7 Sunraysia Wheel Pattern RIms fitted to my Vitara with road tyres.

The car has alway had a bit flip flop when driving along and I put it down to tyre height.

When I had the spare on the back of the car it used to wobble/spring on the mount when hitting bumps.

The new rims and muddies I brought has no wobble/spring. (using very technical words here)

The White Sunraysia rims have a larger offset compared to the Ranger ones I just brought.

So I am thinking the Sunraysia rims are the cause of the flip flop.

Will have to see how the Ranger rims drive.

Author:  BlueSuzy [ Thu Nov 01, 2012 8:46 am ]
Post subject:  Re: Jimny Rims on a Vitara??

zukenutter wrote:
BlueSuzy wrote:
Jim stock steelies are -10
Leaf Sierra stock steelies are -5


Vit rims have to be 0 or + something. More inset.



I have always assumes they were the same :o


Yeah same until i looked at the rims compared to my sierra's. more dish. 8)

Author:  zukenutter [ Thu Nov 01, 2012 8:57 am ]
Post subject:  Re: Jimny Rims on a Vitara??

BlueSuzy wrote:
zukenutter wrote:
BlueSuzy wrote:
Jim stock steelies are -10
Leaf Sierra stock steelies are -5


Vit rims have to be 0 or + something. More inset.



I have always assumes they were the same :o


Yeah same until i looked at the rims compared to my sierra's. more dish. 8)


Learn something new everyday :D I'll have to stop telling people they are the same :oops:

Author:  BlueSuzy [ Thu Nov 01, 2012 10:29 am ]
Post subject:  Re: Jimny Rims on a Vitara??

This is for the WT with dimpled circles style. They look the same.

NT sierra with triangles may be different

Author:  suzukiboy [ Sun Nov 04, 2012 2:55 pm ]
Post subject:  Re: Jimny Rims on a Vitara??

Does anyone know what the Offset is for the Dynamic Black Steel Wheels?
There website doesn't say.

The Mullins Ranger White Steel Wheels I have are - Offset 10 Pos.

The Dynamic Wheels sit inside the guards compared the Mullins outside.

I am worried the Dynamic Wheels are not the correct/offset for my Vitara.

Author:  DarkHorse [ Sun Nov 04, 2012 3:35 pm ]
Post subject:  Re: Jimny Rims on a Vitara??

Define correct?
You're running the Calmini lift, aren't you? What size tyres? Body Lift?

If they are inside the guard, good.
If your tyres don't catch on the guards or firewall as they steer or as the suspension compresses, good.
If your tyres don't rub on the chassis at full lock, good.
If your wheelbearings don't die a horrible death every 5,000km, good.

If none of the above occurs, I'd say that's pretty much as correct as you can get.

If any of the above occurs (except maybe the bearings) there are easy fixes: Flares, guard or firewall chopping/hammering, adjusting steering stops.

If all the above occur you'd want to have a good reason for running the rims - or be able to blame it on the 32" tyres you're trying to stuff under there.

Author:  suzukiboy [ Sun Nov 04, 2012 4:20 pm ]
Post subject:  Re: Jimny Rims on a Vitara??

DarkHorse wrote:
Define correct? Pretty much as you listed below, I thought I might have to have a certain offset or else tyre/part damage.
You're running the Calmini lift, aren't you? Yes What size tyres? 30" Body Lift? No

If they are inside the guard, good.
If your tyres don't catch on the guards or firewall as they steer or as the suspension compresses, good.
If your tyres don't rub on the chassis at full lock, good. I test fitted the front and no problem, but not with flexing the vechicle.
I haven't test fitted the rear, I think on full flex they will scrub the inner body wheel arch as the old MTR's just touched on one side

If your wheelbearings don't die a horrible death every 5,000km, good. NO COMMENT

If none of the above occurs, I'd say that's pretty much as correct as you can get.

If any of the above occurs (except maybe the bearings) there are easy fixes: Flares, guard or firewall chopping/hammering, adjusting steering stops.

If all the above occur you'd want to have a good reason for running the rims - or be able to blame it on the 32" tyres you're trying to stuff under there.


Here is a pic of the old MTR's and Mullins Wheels.

Image

Author:  DarkHorse [ Sun Nov 04, 2012 5:05 pm ]
Post subject:  Re: Jimny Rims on a Vitara??

I *think* you'll be OK then... sounds like they're probably +25 or so. More + offset will help clear the arches with steering, but check the clearance on the chassis:
Image

If it's just a corner of the tyre rubbing on the inner arch at the back you might get lucky, more + offset will bring the tyre closer but reduce the diameter of the tyre swing as it moves up.

Whack 'em on and see how ya go :lol:

Author:  suzukiboy [ Sun Nov 04, 2012 9:27 pm ]
Post subject:  Re: Jimny Rims on a Vitara??

I just checked my receipt from the tyre shop and it has +10 offset for the rims.

Also have emailed Dynamic to see what the ofset is.

Will have to fit the wheels and try it out next weekend.

Author:  DarkHorse [ Mon Nov 05, 2012 4:09 am ]
Post subject:  Re: Jimny Rims on a Vitara??

So the same as your white ones? Too easy?

Author:  suzukiboy [ Mon Nov 05, 2012 12:04 pm ]
Post subject:  Re: Jimny Rims on a Vitara??

DarkHorse wrote:
So the same as your white ones? Too easy?



No, just got the email back from Dynamic and they said the rims are -12.


Tyre place said NO they are not -12 you have +10.


Ok test fit this arvo.

Author:  suzukiboy [ Mon Nov 05, 2012 6:28 pm ]
Post subject:  Re: Jimny Rims on a Vitara??

Ok did a test fit and flex, it all clears at the moment.

Pics tomorrow.

Author:  suzukiboy [ Tue Nov 06, 2012 6:06 am ]
Post subject:  Re: Jimny Rims on a Vitara??

On another subject does anyone know whereto get Chrome mag wheel nuts cheap.

Suzuki 12x1.25

Everyone ask too much for them and the quality is crap as well.

Author:  zukenutter [ Tue Nov 06, 2012 6:40 am ]
Post subject:  Re: Jimny Rims on a Vitara??

I got mine from StupidCheap, everywhere seemed to be much the same price, give or take, and at least they had 5 packs of four in stock at the time.

Author:  Reubs [ Tue Nov 06, 2012 3:38 pm ]
Post subject:  Re: Jimny Rims on a Vitara??

suzukiboy wrote:
On another subject does anyone know whereto get Chrome mag wheel nuts cheap.

Wreckers...

Author:  suzukiboy [ Tue Nov 06, 2012 8:13 pm ]
Post subject:  Re: Jimny Rims on a Vitara??

Reubs wrote:
suzukiboy wrote:
On another subject does anyone know whereto get Chrome mag wheel nuts cheap.

Wreckers...



Went to one wreckers on the weekend and he said it wasn't worth his time selling me old wheel nuts.

Author:  atari4x4 [ Tue Nov 06, 2012 8:22 pm ]
Post subject:  Re: Jimny Rims on a Vitara??

does QLD have self serve wreckers?

Author:  DarkHorse [ Tue Nov 06, 2012 8:46 pm ]
Post subject:  Re: Jimny Rims on a Vitara??

zukenutter wrote:
I got mine from StupidCheap, everywhere seemed to be much the same price, give or take, and at least they had 5 packs of four in stock at the time.


I got a quote from Repco, and then bought them from Tempe Tyres for around half that.

Author:  suzukiboy [ Tue Nov 06, 2012 9:03 pm ]
Post subject:  Re: Jimny Rims on a Vitara??

atari4x4 wrote:
does QLD have self serve wreckers?


Not any I know of or visit.

Author:  suzukiboy [ Tue Nov 06, 2012 9:10 pm ]
Post subject:  Re: Jimny Rims on a Vitara??

DarkHorse wrote:
zukenutter wrote:
I got mine from StupidCheap, everywhere seemed to be much the same price, give or take, and at least they had 5 packs of four in stock at the time.


I got a quote from Repco, and then bought them from Tempe Tyres for around half that.


I might have to ring a few of the tyre shop.

Author:  alexvitara [ Tue Nov 06, 2012 9:24 pm ]
Post subject:  Re: Jimny Rims on a Vitara??

suzukiboy wrote:
atari4x4 wrote:
does QLD have self serve wreckers?


Not any I know of or visit.


Salisbury wrecking.

just pocket them.

Author:  suzukiboy [ Tue Nov 06, 2012 9:29 pm ]
Post subject:  Re: Jimny Rims on a Vitara??

alexvitara wrote:
suzukiboy wrote:
atari4x4 wrote:
does QLD have self serve wreckers?


Not any I know of or visit.


Salisbury wrecking.

just pocket them.



Or throw them over the fence.

Author:  suzukiboy [ Sun Nov 11, 2012 6:21 pm ]
Post subject:  Re: Jimny Rims on a Vitara??

Fitted the Jimny rims to the Sierra, looks nice.

Author:  suzukiboy [ Thu Dec 06, 2012 10:12 pm ]
Post subject:  Re: Jimny Rims on a Vitara??

Here is how the BFGoodrich fit.
Anyone can see the offset is different.

Image

Image

Image

Image

Image

Image

Image

Image

Page 1 of 2 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/