| auszookers.com http://auszookers.com/forum/ |
|
| Vitara engine in my sierra http://auszookers.com/forum/viewtopic.php?f=5&t=37057 |
Page 1 of 1 |
| Author: | Richo_696 [ Mon Nov 12, 2012 2:13 pm ] |
| Post subject: | Vitara engine in my sierra |
Hay guys my 94 Sierra died the other day I was thinking of putting a vitara motor in G16b but I have been tOld so many different stories can anyone please help or confirm if I get the g16b and the conversion kit do I need to get the fuel tank also and what else I will need and is it easy enough to do. |
|
| Author: | Scrawny [ Mon Nov 12, 2012 2:16 pm ] |
| Post subject: | Re: Vitara engine in my sierra |
Welcome to AZ! Have a bit of a search around here, there's heaps of info on this conversion. The carby motor is easier to fit but the EFi one is nicer to drive |
|
| Author: | reeceh [ Tue Nov 13, 2012 8:10 pm ] |
| Post subject: | Re: Vitara engine in my sierra |
As said do a search. I have the g16b in my Sierra. You can either get a American adaptor kit from lowrange offroad if you don't want to run a 2 inch body lift or just use the benT adaptor kit found in the business section. U will still need one if you go carby g16. You can send your vitara loom to killa kustom cables and for about $500 he will send it back as a plug and play loom. You can use the swb vit efi tank but you have to modify the bracketry in the sierra. I think you can also use a coily tank with a vit pump setup. Or you can just run a external efi pump. I have a surge tank and lifter pump aswell. Sierra radiator with a shroud is fine for cooling. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|