| auszookers.com http://auszookers.com/forum/ |
|
| Sierra 1.3 vacuum leak ? http://auszookers.com/forum/viewtopic.php?f=5&t=37250 |
Page 1 of 1 |
| Author: | suzukikid [ Tue Nov 20, 2012 6:11 pm ] |
| Post subject: | Sierra 1.3 vacuum leak ? |
Hey all I rebuilt my motor on the weekend!!! Is awsome untill the auto choke turns off! Haha has a vacuume leak somewhere... If I cover half the carby the engine idels like a gem!!! On the weekend I am going to rip the carby and inlet manifold off again and new gaskets and make sure it's all sealed up properly. Is there anywhere I should be looking that is common on a 1.3? Also the gasket kit I got is for a g13a... Mines a g13b... Are the inlet manifolds different? Cheers |
|
| Author: | zukmeista [ Tue Nov 20, 2012 6:18 pm ] |
| Post subject: | Re: Vacuume leak |
No, all gaskets should be the same assuming you are talking SOHC G13B, get some startyabastard or similar and spray around carby/intake, if revs pick up you have found your leak. |
|
| Author: | christover1 [ Tue Nov 20, 2012 7:03 pm ] |
| Post subject: | Re: Vacuume leak |
the vacuum actuators can seize/leak, also |
|
| Author: | suzukikid [ Wed Nov 21, 2012 6:36 pm ] |
| Post subject: | Re: Sierra 1.3 vacuum leak ? |
cheers guys i will check this before i pull it apart again....i got new gaskets today.... |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|