| auszookers.com http://auszookers.com/forum/ |
|
| 2" vitara coil / strut spacers http://auszookers.com/forum/viewtopic.php?f=5&t=37497 |
Page 1 of 1 |
| Author: | jimbo_jones [ Sat Dec 01, 2012 8:05 pm ] |
| Post subject: | 2" vitara coil / strut spacers |
looking at these on ebay anyone used them what are they like? are they worth using Im after a bit more hight but the springs/shocks work well that are in it I know I will have to sue longer shocks in the rear. if I use these spacers will I need some camber bolts to adust the camber back to std? or is this not a issue? http://cgi.ebay.com/ws/eBayISAPI.dll?Vi ... ink:top:en 
|
|
| Author: | Charlie Brown [ Sat Dec 01, 2012 11:27 pm ] |
| Post subject: | Re: 2" vitara coil / strut spacers |
I needed camber bolts for my 2" spring and shock lift so I think this should b the same 
|
|
| Author: | dirtydogz [ Sun Dec 02, 2012 2:48 am ] |
| Post subject: | Re: 2" vitara coil / strut spacers |
Have a look at this site in the UK.http://www.bits4vits.co.uk/store/vitara ... cat_1.html |
|
| Author: | Charlie Brown [ Sun Dec 02, 2012 9:08 am ] |
| Post subject: | Re: 2" vitara coil / strut spacers |
If u have a look on my build thread viewtopic.php?t=32984 I've bought spacers and other stuff from bits for vits to get some spacer lift too  might give u some ideas 
|
|
| Author: | Samwich [ Sun Dec 02, 2012 9:56 am ] |
| Post subject: | Re: 2" vitara coil / strut spacers |
I just got my bits4vits strut spacers in the mail yesterday  I have 2" springs - no chamber bolts |
|
| Author: | oohsam [ Tue Dec 04, 2012 8:55 am ] |
| Post subject: | Re: 2" vitara coil / strut spacers |
I did a 2 inch lift on my swb vit. Needed camber bolts. |
|
| Author: | Samwich [ Tue Dec 04, 2012 9:04 am ] |
| Post subject: | Re: 2" vitara coil / strut spacers |
Really?? :S |
|
| Author: | oohsam [ Tue Dec 04, 2012 9:07 am ] |
| Post subject: | Re: 2" vitara coil / strut spacers |
yeah, my camber was out. My kit came with camber bolts so I just whipped them in, am yet to get an alignment done though, been bloody lazy. |
|
| Author: | Samwich [ Tue Dec 04, 2012 9:14 am ] |
| Post subject: | Re: 2" vitara coil / strut spacers |
Ahhh you probs got dobinsons ? they are a true 50mm i think, unless they are the lwb put onto a swb? Mine were the noramal 40mm Yeah i got some 3" springs, 2.5" strut spacer, Bump stops, diff drops, tailshaft spacer to lift mine more, but cant be assed to install them atm... Ill wait tll my gears are in for my 31's, With my 235's 2" is enough haha 
|
|
| Author: | oohsam [ Tue Dec 04, 2012 9:21 am ] |
| Post subject: | Re: 2" vitara coil / strut spacers |
Yeah you're right its 50mm not 2 inchs so just a touch over. But much better cause im running a bullbar and winch so it weighs it down a touch. Did u get gears yet? where, how much? |
|
| Author: | Samwich [ Tue Dec 04, 2012 9:26 am ] |
| Post subject: | Re: 2" vitara coil / strut spacers |
Gears ill get on the 15th (Pay DAY ) http://www.trailtough.com/index.php?pag ... &Itemid=53they are $649, $100 off atm So about $720 shipped i already have a 2nd hand tranny case, so ill put them into that and swap it over for the one in my car
|
|
| Author: | oohsam [ Tue Dec 04, 2012 9:30 am ] |
| Post subject: | Re: 2" vitara coil / strut spacers |
Make sure you doccument it and take lots of pictures. and i mean LOTS of pictures. |
|
| Author: | Samwich [ Tue Dec 04, 2012 9:32 am ] |
| Post subject: | Re: 2" vitara coil / strut spacers |
Haha if i can be bothered hahaha |
|
| Author: | DarkHorse [ Tue Dec 04, 2012 9:50 am ] |
| Post subject: | Re: 2" vitara coil / strut spacers |
It's a hard job to document because your hands are usually covered in oil. I've got a pretty good set of instructions with big colour pics I can forward if anyone wants them. |
|
| Author: | oohsam [ Tue Dec 04, 2012 9:52 am ] |
| Post subject: | Re: 2" vitara coil / strut spacers |
DarkHorse wrote: It's a hard job to document because your hands are usually covered in oil. I've got a pretty good set of instructions with big colour pics I can forward if anyone wants them. Thats why you need a camera, tripod and a RF remote pointed directly at teh table. Hit the button and snap! haha.. Yes please. Hook a brother up. |
|
| Author: | Samwich [ Tue Dec 04, 2012 9:54 am ] |
| Post subject: | Re: 2" vitara coil / strut spacers |
Yeah dark if you could send me it to, At this stage i might pay to get it done >.< will cost me $400ish tho :/ Dont have the right tools... |
|
| Author: | camskea [ Tue Dec 04, 2012 2:57 pm ] |
| Post subject: | Re: 2" vitara coil / strut spacers |
I just bought some 31's too.... What do the gears do for you in regard to the size of the tyres? |
|
| Author: | Samwich [ Tue Dec 04, 2012 2:59 pm ] |
| Post subject: | Re: 2" vitara coil / strut spacers |
Brings the ratio down in LOW Range Bacically makes you go slower |
|
| Author: | atari4x4 [ Tue Dec 04, 2012 3:58 pm ] |
| Post subject: | Re: 2" vitara coil / strut spacers |
nice thread hijack ya poofs 
|
|
| Author: | DarkHorse [ Wed Dec 05, 2012 11:34 am ] |
| Post subject: | Re: 2" vitara coil / strut spacers |
Gears install is here so we can get the hijack out of this thread... viewtopic.php?f=5&t=37559 Thanks to christover and shandy for passing them along before me. |
|
| Author: | oohsam [ Wed Dec 05, 2012 11:59 am ] |
| Post subject: | Re: 2" vitara coil / strut spacers |
atari4x4 wrote: nice thread hijack ya poofs Shit boys, its the forum cops, lets get the fark outa here! haha. 
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|