| auszookers.com http://auszookers.com/forum/ |
|
| 1.3 diff centres http://auszookers.com/forum/viewtopic.php?f=5&t=37517 |
Page 1 of 1 |
| Author: | Zuzukie [ Sun Dec 02, 2012 7:34 pm ] |
| Post subject: | 1.3 diff centres |
Heya Shattered some cv's this weekend due to a welded front and 31's on stock gears Its a 3.7:1 with 22 spline side gears Point or question is Is there any difference between the front and rear diff centres as i have a spare rear centre that is a 3.7:1 but didnt want to put it in the front to find that something isnt goin to work Anyone able to help before i spend money when i might not need to |
|
| Author: | DMAC [ Sun Dec 02, 2012 8:28 pm ] |
| Post subject: | Re: 1.3 diff centres |
Side gears of the diff centre have a different number of splines. Rear has 26, Front has 22. |
|
| Author: | defibros [ Sun Dec 02, 2012 8:47 pm ] |
| Post subject: | Re: 1.3 diff centres |
If we swap the front spines to 26 spines , does it mean we can fit the rear diff to the front ? |
|
| Author: | sideways [ Sun Dec 02, 2012 8:59 pm ] |
| Post subject: | Re: 1.3 diff centres |
You will need chromo axles to get 26 spline axles. The front centre will be a 2 pinion design too, weaker than a 4 pinion but the 4 pinion bolts right in. |
|
| Author: | Zuzukie [ Sun Dec 02, 2012 9:43 pm ] |
| Post subject: | Re: 1.3 diff centres |
Thanks for that Ill see if i can find a good cond front centre |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|