auszookers.com
http://auszookers.com/forum/

LWB vitara bullbar mounts?
http://auszookers.com/forum/viewtopic.php?f=5&t=38929		 Page 1 of 1
Author:  BRAD [ Mon Feb 11, 2013 7:31 pm ]
Post subject:  LWB vitara bullbar mounts?
hey all took my front bar off today to find only four bolts hold it on and was thinking when i get a bullbar will i need to drill holes in the mounts or is it held by four bolts cause it dosnt seem right cheers

Image
Author:  larry [ Mon Feb 11, 2013 8:42 pm ]
Post subject:  Re: LWB vitara bullbar mounts?
mate these are the bullbar mounts that will come with the bar, they pick up the 4 stock mounting bolts. i drilled 2 m12s through the chassis to strengthen them.

i used these mounts to mount my winch bar and winched from them several times. theyre strong


EDIT: you dont need to use the m12s through the chassis. tjm designed them to just use the stock points

Image
Author:  DarkHorse [ Mon Feb 11, 2013 9:06 pm ]
Post subject:  Re: LWB vitara bullbar mounts?
That's all there is stock - 2 little M8s. Not nearly enough to trust with a recovery pull IMO.

Most of us punch two M12s through those front nubs, some (I think Christover?) wrapped a mount down around the front crossmember as well.
Image
Author:  christover1 [ Mon Feb 11, 2013 9:17 pm ]
Post subject:  Re: LWB vitara bullbar mounts?
My mounts are stock.
Tho bar is lifted to match the body lift.

Image
Author:  christover1 [ Mon Feb 11, 2013 9:18 pm ]
Post subject:  Re: LWB vitara bullbar mounts?
I think stock, I have not changed anything, previous owner mat have ?

Image
Author:  BRAD [ Tue Feb 12, 2013 5:49 am ]
Post subject:  Re: LWB vitara bullbar mounts?
Might end up getting arb bar, so thats the way to go by the looks of things but if I drill the two holes im mostlikly going to drill into the bullbar aswell which os not a problem
Cool cheers guys thanks for posting pics appreciated
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/