auszookers.com
http://auszookers.com/forum/

G16A Swb Vit id and help
http://auszookers.com/forum/viewtopic.php?f=5&t=38993		 Page 1 of 1
Author:  jonno_racing [ Thu Feb 14, 2013 11:53 am ]
Post subject:  G16A Swb Vit id and help
hey guys i have just picked up this vit for parts for my ute. its a SWB Auto, G16A

is the auto 3 speed???
how rare/what starter would fit (it currently has none)
will a Sierra dizzy fit? (also missing)

Gear shift has PRND21
Image

Image

sorry all the pics i could get..

also what diff ratio will this be?
Phil
Author:  atari4x4 [ Thu Feb 14, 2013 12:08 pm ]
Post subject:  Re: G16A Swb Vit id and help
carby swb = trimatic + no OD switch on the shifter

not 100% sure on the diff ratio's, might be 4.6 or 4.8's from memory.
Author:  christover1 [ Thu Feb 14, 2013 12:12 pm ]
Post subject:  Re: G16A Swb Vit id and help
http://nbs4x4club.com/forum/index.php?topic=10743.0
Author:  jonno_racing [ Thu Feb 14, 2013 12:13 pm ]
Post subject:  Re: G16A Swb Vit id and help
Thanks guss!
not bad for a few hungie!! :) hopefully the motor is healthy! 220,000km on the clock..
Working out the gearing might take a bit more tho?
Author:  jonno_racing [ Thu Feb 14, 2013 12:14 pm ]
Post subject:  Re: G16A Swb Vit id and help
Thanks chris! 4.62 hey... that pluss 4.1 transfer might be ok for 33's then....
Author:  christover1 [ Thu Feb 14, 2013 12:18 pm ]
Post subject:  Re: G16A Swb Vit id and help
Only the front diff is useable in Sierras.
Unless you intend to make a Vitara/Sierra rear diff, which is cool.
4:6 is a good ratio in my mind, bit stronger than 5:12 I'm told,
no idea if that is BS or not.
Author:  jonno_racing [ Thu Feb 14, 2013 12:21 pm ]
Post subject:  Re: G16A Swb Vit id and help
christover1 wrote:
Only the front diff is useable in Sierras.
Unless you intend to make a Vitara/Sierra rear diff, which is cool.
4:6 is a good ratio in my mind, bit stronger than 5:12 I'm told,
no idea if that is BS or not.

Yeah i am going a VIT floater in the rear.
Author:  Fatzook [ Thu Feb 14, 2013 12:22 pm ]
Post subject:  Re: G16A Swb Vit id and help
christover1 wrote:
4:6 is a good ratio in my mind, bit stronger than 5:12 I'm told,
no idea if that is BS or not.



Based on the theory that smaller teeth are weaker, then the 5.12's would be marginally weaker.
Author:  jonno_racing [ Thu Feb 14, 2013 3:32 pm ]
Post subject:  Re: G16A Swb Vit id and help
Any ideas on starters?
Author:  atari4x4 [ Thu Feb 14, 2013 3:38 pm ]
Post subject:  Re: G16A Swb Vit id and help
NFI, i'm guessing a G16a :lol:

if you're going to part out what you don't want/use & there is a dead foot pedal/foot rest on the trans tunnel, i'll take it.
Author:  jonno_racing [ Thu Feb 14, 2013 4:02 pm ]
Post subject:  Re: G16A Swb Vit id and help
atari4x4 wrote:
NFI, i'm guessing a G16a :lol:

if you're going to part out what you don't want/use & there is a dead foot pedal/foot rest on the trans tunnel, i'll take it.


If it wont fit in the sierra its yours.

i have a jimny starter here, just deciding if i should thow that in it for now.
Author:  christover1 [ Thu Feb 14, 2013 4:05 pm ]
Post subject:  Re: G16A Swb Vit id and help
I think early carby vits use same starter as Sierras, but only hearsay dunno fer sure
Author:  jonno_racing [ Thu Feb 14, 2013 4:33 pm ]
Post subject:  Re: G16A Swb Vit id and help
christover1 wrote:
I think early carby vits use same starter as Sierras, but only hearsay dunno fer sure

So same as a jimny! we will see with this one in a few weeks!
Author:  Jester [ Thu Feb 14, 2013 5:46 pm ]
Post subject:  Re: G16A Swb Vit id and help
same starter as a G16 manual go well in it, mine was trimatic auto, now manual still same starter
Author:  christover1 [ Thu Feb 14, 2013 5:53 pm ]
Post subject:  Re: G16A Swb Vit id and help
These sellers say they all the same.
http://www.ebay.com.au/itm/New-Suzuki-B ... 4156ae4623

http://www.ebay.com.au/itm/Starter-Moto ... 4d04ff65f4
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/