Oh yeah, sorry. I miss read it as a swb front is the same length as a lwb rear.
Sorry Zooky08
| auszookers.com http://auszookers.com/forum/ |
|
| Tailshaft length http://auszookers.com/forum/viewtopic.php?f=5&t=39020 |
Page 1 of 1 |
| Author: | jonno_racing [ Fri Feb 15, 2013 5:42 pm ] |
| Post subject: | Tailshaft length |
can any one tell me how long a stock LWB rear tailshaft is? i have a jimny font here that looks suspiciously around the right length, or close to it, My lwb has no transfer or diff in it ATM so a little hard to measure |
|
| Author: | zooky08 [ Fri Feb 15, 2013 6:03 pm ] |
| Post subject: | Re: Tailshaft length |
Maruti one i have hear is roughly 835 flange to flange, with the spline right in. Front shafts on a lwb are usualy same length as swb i think |
|
| Author: | Jackson [ Fri Feb 15, 2013 6:16 pm ] |
| Post subject: | Re: Tailshaft length |
zooky08 wrote: Maruti one i have hear is roughly 835 flange to flange, with the spline right in. Front shafts on a lwb are usualy same length as swb i think Nah swb sierra fronts are way to short. Mine is about 845 sitting in the driveway. |
|
| Author: | hooki [ Fri Feb 15, 2013 6:27 pm ] |
| Post subject: | Re: Tailshaft length |
Jackson wrote: zooky08 wrote: Maruti one i have hear is roughly 835 flange to flange, with the spline right in. Front shafts on a lwb are usualy same length as swb i think Nah swb sierra fronts are way to short. Mine is about 845 sitting in the driveway. pretty sure zooky08 is right. SWB and LWB front shafts are the same length |
|
| Author: | Jackson [ Fri Feb 15, 2013 6:39 pm ] |
| Post subject: | Re: Tailshaft length |
Oh yeah, sorry. I miss read it as a swb front is the same length as a lwb rear. Sorry Zooky08
|
|
| Author: | jonno_racing [ Sat Feb 16, 2013 8:17 am ] |
| Post subject: | Re: Tailshaft length |
zooky08 wrote: Maruti one i have hear is roughly 835 flange to flange, with the spline right in. Front shafts on a lwb are usualy same length as swb i think Cheers! jimny front is 760mm closed flange to flange... might work perfect with a vit floater... time will tell 
|
|
| Author: | SierraDan [ Sat Feb 16, 2013 8:46 am ] |
| Post subject: | Re: Tailshaft length |
jonno_racing wrote: zooky08 wrote: Maruti one i have hear is roughly 835 flange to flange, with the spline right in. Front shafts on a lwb are usualy same length as swb i think Cheers! jimny front is 760mm closed flange to flange... might work perfect with a vit floater... time will tell Ill measure centre of housing to flange if you want between vit and sierra |
|
| Author: | jonno_racing [ Sat Feb 16, 2013 2:50 pm ] |
| Post subject: | Re: Tailshaft length |
ah dont stress to much dan, if you want feel free tho! hopefuly i will have mine all bolted under in a few months. |
|
| Author: | SierraDan [ Sat Feb 16, 2013 10:57 pm ] |
| Post subject: | Re: Tailshaft length |
About 250mm flange to axle centre line. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|