| auszookers.com http://auszookers.com/forum/ |
|
| Good pre filter http://auszookers.com/forum/viewtopic.php?f=5&t=39061 |
Page 1 of 1 |
| Author: | sam_516 [ Sun Feb 17, 2013 9:20 pm ] |
| Post subject: | Good pre filter |
Hey guys, brought a jimny a week or 2 ago has a snorkel on it with a foam pre filter on it, it is very restrictive and went for a drive yesterday and it started pouring down and when the pre filter got wet it started chocking the engine... Should I just run no prefilter and turn the intake thing around and use my air compressor to blow the paper filter out wen driving in the dust? |
|
| Author: | jdk81 [ Sun Feb 17, 2013 9:32 pm ] |
| Post subject: | Re: Good pre filter |
I would only put the prefilter on when driving in the dust. Or look at a donaldson type precleaner |
|
| Author: | Gwagensteve [ Mon Feb 18, 2013 6:22 am ] |
| Post subject: | Re: Good pre filter |
Throw the foam pre filter away. They are restrictive and require too much servicing. As per jdk81, of you want a pre cleaner, fit a donaldson (type - there's lots of copies) pre filter. They look like this I wouldn't really recommend blowing out a paper filter with compressed air. It can damage the paper result in dust getting on the "wrong" side of the filter. If you wish to "service" a paper filter, take it out and gently tap it on the ground on edge (as in, with the filter media against the ground) this will dislodge dust without damaging the paper or pushing dust into the filter. Steve. |
|
| Author: | GeckoXL7 [ Mon Feb 18, 2013 7:28 am ] |
| Post subject: | Re: Good pre filter |
|
|
| Author: | christover1 [ Mon Feb 18, 2013 7:36 am ] |
| Post subject: | Re: Good pre filter |
Wow, they are cool looking precleaners. I just bought a cheapy ebay one. But one of the Top spins could be on the future wish list.
|
|
| Author: | GeckoXL7 [ Mon Feb 18, 2013 7:48 am ] |
| Post subject: | Re: Good pre filter |
Im trying to find where to get them, found one store in the US sell them for $115, i like them as Never need to be emptied and less restrictive than the bowl type, they have differn't sizes for different engine power ( CFM ) I also saw this which i may buy but i cant see where the dirt will come out, they say it doesnt need to be emptied, its a RAM and Cyclonic precleaner in one. |
|
| Author: | christover1 [ Mon Feb 18, 2013 8:03 am ] |
| Post subject: | Re: Good pre filter |
I had a Donaldson bowl type precleaner on my Moke in the 80's. Even on a 6 week outback trip, it rarely needed emptying. I haven't noticed any ill effects with this one, yet, but will keep an eye on fuel economy, power etc. |
|
| Author: | bakerboy [ Mon Feb 18, 2013 10:07 am ] |
| Post subject: | Re: Good pre filter |
GeckoXL7 wrote: Im trying to find where to get them, found one store in the US sell them for $115, i like them as Never need to be emptied and less restrictive than the bowl type, they have differn't sizes for different engine power ( CFM ) I also saw this which i may buy but i cant see where the dirt will come out, they say it doesnt need to be emptied, its a RAM and Cyclonic precleaner in one. I love seeing Toyota tards turn the factory pre cleaner around so the hole faces forward, never go full retard. |
|
| Author: | GeckoXL7 [ Mon Feb 18, 2013 10:56 am ] |
| Post subject: | Re: Good pre filter |
Ahh so that hole points backwards, Makes sense, so will cross this off my to buy list, and keep looking for the TopSpin. There is another brand TurboIII which is made from metal, not sure if i would want that sitting on my snorkel. Its quite expensive too. $350+ and then there is this. |
|
| Author: | christover1 [ Mon Feb 18, 2013 11:05 am ] |
| Post subject: | Re: Good pre filter |
People do steal snorkle tops, and trees can smack them. No way I want a $350 thing on my snorkle, unless its chained down and alarmed :O |
|
| Author: | atari4x4 [ Mon Feb 18, 2013 11:41 am ] |
| Post subject: | Re: Good pre filter |
GeckoXL7 wrote: Yeah exactly, something like that would be gone soon after you lock your car. The turboIII is around $130 so not to bad. i'd be more concerned about getting spot lights/LED light bars knocked off before some funny looking pre-cleaner. IMO you should put that $130 towards getting low range fixed. why you delete your post gecko? |
|
| Author: | GeckoXL7 [ Mon Feb 18, 2013 11:58 am ] |
| Post subject: | Re: Good pre filter |
Cause i felt like it Low range is next on the list, Looking at the Low range Transfer Rebuild kit. Had a bit of a look at it on the weekend and there is oil leaking out the front Shaft, so guess the seal is gone and who knows what else. Got no need for a top spin yet, might need it of do border track etc. Deleted post i mentioned, Foam PreCleaners are only good for keeping bugs out of the Ram heads mesh |
|
| Author: | Mike57 [ Tue Feb 19, 2013 7:30 pm ] |
| Post subject: | Re: Good pre filter |
I spoke to Donaldson today about a proper pre-filter. I had been using an oiled foam prefilter and the deficiencies of that approach were obvious when it is clogged up with dust. I was worried that there might be a minimum airflow requirement for the Donaldson filter to work. The guy I spoke to suggested the clear View model for the Jimny and stated that there was no minimum airflow requiremeenmt but there was a maximum air flow. It will choke the engine if the rating is too low for the airflow of the engine. Interestingly he recommended the old clear view one and not the top spin. Price difference was something like $45 compared to $175 so the clear view was a winner on that basis anyway. Investigations are continuing. |
|
| Author: | jdk81 [ Wed Feb 20, 2013 4:39 am ] |
| Post subject: | Re: Good pre filter |
check the air filter rant http://auszookers.com/forum/viewtopic.php?f=17&t=12199 |
|
| Author: | KEENSY85 [ Wed Feb 20, 2013 5:15 pm ] |
| Post subject: | Re: Good pre filter |
http://pages.ebay.com/link/?nav=item.vi ... 1174838147 |
|
| Author: | atari4x4 [ Wed Feb 20, 2013 5:21 pm ] |
| Post subject: | Re: Good pre filter |
KEENSY85 wrote: http://pages.ebay.com/link/?nav=item.view&id=251174838147 error: This page may have moved or is no longer available. Please try one of the following |
|
| Author: | KEENSY85 [ Thu Feb 21, 2013 3:08 am ] |
| Post subject: | Re: Good pre filter |
Dam it allways happens to me |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|