| auszookers.com http://auszookers.com/forum/ |
|
| RUF conversion http://auszookers.com/forum/viewtopic.php?f=5&t=39088 |
Page 1 of 1 |
| Author: | Daleyzooker [ Mon Feb 18, 2013 8:27 pm ] |
| Post subject: | RUF conversion |
Hey guys bought my first zook and they have tried to do an ruf conversion except my front shackles now fold up lol and when I unfold them and try and drive get mad death rattles at about 40 klms if I hit a bump just wondering what to do do I buy the 2 inch lifted front springs or is there an easy way to fix all this and keep the flex I have? Any help would be appreciated just chasing people's opinions and thoughts Cheers dale |
|
| Author: | atari4x4 [ Mon Feb 18, 2013 8:31 pm ] |
| Post subject: | Re: RUF conversion |
pics? |
|
| Author: | Daleyzooker [ Mon Feb 18, 2013 8:34 pm ] |
| Post subject: | Re: RUF conversion |
Will put some up in the next couple of days sorry |
|
| Author: | Daleyzooker [ Mon Feb 18, 2013 8:45 pm ] |
| Post subject: | Re: RUF conversion |
I was thinking castor wedges and moving the shackle mounts but that means I would also have extend the chassis yes? |
|
| Author: | atari4x4 [ Mon Feb 18, 2013 8:55 pm ] |
| Post subject: | Re: RUF conversion |
pretty sure most people do the chassis extension... i don't know enough about sierra, someone will pipe up soon. heaps of info on this topic, punch RUF into the search engine & start reading. viewtopic.php?f=14&t=21321&hilit=how+to+ruf viewtopic.php?f=5&t=32020&hilit=RUF viewtopic.php?f=5&t=31102&hilit=RUF |
|
| Author: | JrZook [ Mon Feb 18, 2013 8:57 pm ] |
| Post subject: | Re: RUF conversion |
You will need to space out the front spring hangers 75mm at bare minimum to make the rear springs work up there with stock length shackles. |
|
| Author: | Daleyzooker [ Mon Feb 18, 2013 9:07 pm ] |
| Post subject: | Re: RUF conversion |
Thanks guys but just wondering if its worth all the trouble straight up or do I just get 2" lifted front springs for now? And do it all when I make my front bar later on? |
|
| Author: | atari4x4 [ Mon Feb 18, 2013 9:11 pm ] |
| Post subject: | Re: RUF conversion |
read those links? |
|
| Author: | Daleyzooker [ Mon Feb 18, 2013 9:12 pm ] |
| Post subject: | Re: RUF conversion |
Ok thanks |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|