| auszookers.com http://auszookers.com/forum/ |
|
| sj80 coily model air intake??? http://auszookers.com/forum/viewtopic.php?f=5&t=40712 |
Page 1 of 1 |
| Author: | TonkaZuk [ Sun May 05, 2013 3:14 pm ] |
| Post subject: | sj80 coily model air intake??? |
as the title says i just wanna know whats the differnece in the complete air intake setup compaired to the other models??? i bought a setup for an sj80 (im guessing it wasnt from a coil model) and it seems alittle too high??? is it the whole filter box and just that main hose from the carby to the box that causes the problem??? |
|
| Author: | coily96 [ Sun May 05, 2013 7:26 pm ] |
| Post subject: | Re: sj80 coily model air intake??? |
Pics of sj80 airbox lid, hose and carby hat. |
|
| Author: | TonkaZuk [ Mon May 06, 2013 3:45 am ] |
| Post subject: | Re: sj80 coily model air intake??? |
cheers man |
|
| Author: | hooki [ Mon May 06, 2013 3:57 am ] |
| Post subject: | Re: sj80 coily model air intake??? |
does your coily have a bodylift? This brings the height of the air box up and cause the hose that goes to the carby hat to have a slight kink in it. Airbox/intake setups are completely the same between all sierra's with 1.3 engines to my knowledge. |
|
| Author: | TonkaZuk [ Mon May 06, 2013 5:13 am ] |
| Post subject: | Re: sj80 coily model air intake??? |
I've not long had it but know its got a 2" lift and 4" king springs |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|