[misko]

have a problem with my zook,
all my indicator globes work, they are all the right watts/volts.
left side flashes normal, hazards flash normal BUT right side flashes fast.

no idea what is happening or where to look anymore, checked the connections and swapped globes over to other side
and nothing has changed.

any suggestions ?

[mrw82]

Replace flasher relay.

[misko]

dont all the indicators run on the one relay?

[douglasgiersch]

Are they led or standard jobs? Does the light on the dash come on when indicating to the right, I found mine when nuts when a had the dash out. Most of mine are led but it seems the light in the dash was enough to bring the flashing to a decent speed.

[kenn]

I'd be looking for a bad earth in the right indicators.

[royce]

flasher units speed up when there isnt enough current through them, a high resistance circuit would lower the current enough to make it think a bulb is out.

I would look at all the bulb housings on that side, give them a clean and lube, look at all the connections etc

[shep]

Bad earth or incorrect watt globe

[misko]

hey guys thanks for the reply's, all my globes are standard, not led and the globes in the dash do work. i will have another look after work tomorrow for bad earths and check the globe sockets.
will keep you all updated on what i find.

cheers

[Jaye]

Swap them all to the other side and see if it happens. Sometimes a globe thats about to blow can do funny things like that before it dies,

[ZukinLao]

He already swapped em over and got the same results so its probably not the globes.