| auszookers.com http://auszookers.com/forum/ |
|
| Can anyone identify these rear callipers? http://auszookers.com/forum/viewtopic.php?f=5&t=40918 |
Page 1 of 1 |
| Author: | shayno [ Wed May 15, 2013 4:54 pm ] |
| Post subject: | Can anyone identify these rear callipers? |
Hey gents, Anyone seen these before? They came off a diff i got and i'd like to run a kit through them before fitting them. No identifying marks at all except for the brand "tokico" The caliper adaptors have Davies bros productions etched on them. The disks are just a standard front disk with an adaptor. Thanks guys 
|
|
| Author: | jdk81 [ Wed May 15, 2013 4:59 pm ] |
| Post subject: | Re: Can anyone identify these rear callipers? |
looks a bit like gti calipers with the handbrake bit. |
|
| Author: | shayno [ Wed May 15, 2013 5:13 pm ] |
| Post subject: | Re: Can anyone identify these rear callipers? |
Never though of Gti....my money was on 1990ish galant like the ben T kits. Ill suss out some google pics of the Gti one now, cheers mate |
|
| Author: | blakej [ Wed May 15, 2013 5:22 pm ] |
| Post subject: | Re: Can anyone identify these rear callipers? |
yea they look like gti ones alright http://www.google.co.nz/imgres?biw=1680 ... =275&ty=81 |
|
| Author: | shayno [ Wed May 15, 2013 5:33 pm ] |
| Post subject: | Re: Can anyone identify these rear callipers? |
I think close but no cigar on the GTi callipers....very similar but looks like the caliper sits on a different part of the disk if that makes sence, ie mine sits at 12 oclock,the gti ones look like they sit on the side of the disk so to speak. |
|
| Author: | SierraDan [ Thu May 16, 2013 5:37 am ] |
| Post subject: | Re: Can anyone identify these rear callipers? |
Thats just location. |
|
| Author: | 31zook [ Thu May 16, 2013 2:22 pm ] |
| Post subject: | Re: Can anyone identify these rear callipers? |
Galant I think. |
|
| Author: | Zook_Fan [ Thu May 16, 2013 3:35 pm ] |
| Post subject: | Re: Can anyone identify these rear callipers? |
They look very similar to the pintara callipers. Not the ones required for Joe's floater kit though, later ones. |
|
| Author: | jdk81 [ Thu May 16, 2013 3:56 pm ] |
| Post subject: | Re: Can anyone identify these rear callipers? |
Measure the piston diam and start looking further from there. Any brake pads in it? Any chance they still have legible info on them? Any chance of asking the dude you got the diff off? |
|
| Author: | shayno [ Thu May 16, 2013 5:39 pm ] |
| Post subject: | Re: Can anyone identify these rear callipers? |
I think the smart money is on pintara....scraped a bit more slime off them today and found what looks like a Nissan logo. Ill check out the brake place tomorrow and narrow it down further. Thanks for the help guys. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|
