auszookers.com
http://auszookers.com/forum/

31s on vitara?
http://auszookers.com/forum/viewtopic.php?f=5&t=41155		 Page 1 of 1
Author:  BRAD [ Thu May 30, 2013 7:18 pm ]
Post subject:  31s on vitara?
anyone know if 31s will fit a vitara with a 70mm lift with little scrubbing? cheers
Author:  atari4x4 [ Thu May 30, 2013 7:24 pm ]
Post subject:  Re: 31s on vitara?
they will fit & they will scrub, just depends on how much hammer & grinder time you give it.
Author:  BRAD [ Thu May 30, 2013 7:39 pm ]
Post subject:  Re: 31s on vitara?
if i did no hammering they would scrub pretty hard aye? is yours on 31s?
Author:  christover1 [ Thu May 30, 2013 7:47 pm ]
Post subject:  Re: 31s on vitara?
Amount of rim offset affects scrubbing, too.
Just cross it up, steer, etc, see how much room you have.
Some 31's are smaller than others, so measure tyres, too
Author:  got_bar_work [ Thu May 30, 2013 8:53 pm ]
Post subject:  Re: 31s on vitara?
Lift has nothing to do with tire size
Bumpstop spacers, bodylift and guard cut is how u fit big tires
With that much lift u could run 50mm bumpstop spacers and fit 31 on 10p offset rims
I have 70mm bumpatop spacers and i recon i could fit 33 without a body lift
Author:  BRAD [ Fri May 31, 2013 9:40 pm ]
Post subject:  Re: 31s on vitara?
ahh sweet thanks
Author:  SiKiD_01 [ Sat Jun 01, 2013 8:46 pm ]
Post subject:  Re: 31s on vitara?
31"s on -25 15x8 rims

about 80mm sus lift only. no body lift. i haven't cut any of the outer guards. only the seam on the rear of the front guard.

Image
Author:  BRAD [ Sun Jun 02, 2013 6:12 pm ]
Post subject:  Re: 31s on vitara?
looks sick!! ive got 15x7 on i think -10, on lock to lock do they scrub?
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/