| auszookers.com http://auszookers.com/forum/ |
|
| HID Headlamps, wiring http://auszookers.com/forum/viewtopic.php?f=5&t=41558 |
Page 1 of 1 |
| Author: | dtchch [ Sun Jun 23, 2013 6:09 pm ] |
| Post subject: | HID Headlamps, wiring |
Hey guys, I wanted to change my bulbs to HID, after looking online it seems that most kits won't work because on suzukis the ground switches. Also the kit only has a 2 prong connector while the zook has the 3 prong direct onto the bulb. Any way around this that anyone has come across? Cheers |
|
| Author: | whincup [ Sun Jun 23, 2013 8:34 pm ] |
| Post subject: | Re: HID Headlamps, wiring |
just bought a kit myself (won on ebay for $40 posted!) and it has a plug that just connects directly into the original light bulb plug. no cutting/joining of any wires whatsoever, completely plug and play. factory wiring should be able to handle it no dramas, but i'd done a loom upgrade ages ago anyway. my brothers had the same thing, his was about $200... |
|
| Author: | Matthew [ Sun Jun 23, 2013 8:52 pm ] |
| Post subject: | Re: HID Headlamps, wiring |
You need a h4 kit, if you're having problems you have te wrong kit. It will be plug and play, and the stock wiring doesn't provide the power, it only swithches the relay. |
|
| Author: | dtchch [ Mon Jun 24, 2013 6:56 am ] |
| Post subject: | Re: HID Headlamps, wiring |
whincup wrote: just bought a kit myself (won on ebay for $40 posted!) and it has a plug that just connects directly into the original light bulb plug. no cutting/joining of any wires whatsoever, completely plug and play. factory wiring should be able to handle it no dramas, but i'd done a loom upgrade ages ago anyway. my brothers had the same thing, his was about $200... Thats what I would have expected but this one has a two prong connector... Going to return it as it didn't come with instructions either |
|
| Author: | whincup [ Mon Jun 24, 2013 9:12 pm ] |
| Post subject: | Re: HID Headlamps, wiring |
dtchch wrote: Thats what I would have expected but this one has a two prong connector... two prong connector tells me its either not H4, or its single beam instead of the hi/low beam, or both of those options. you do need to make sure the kit you buy specifies that its capable of both high and low beam... |
|
| Author: | Gwagensteve [ Mon Jun 24, 2013 9:26 pm ] |
| Post subject: | Re: HID Headlamps, wiring |
I was messing with a HID kit I have in the shed today, and I can confirm it is plug and play assuming you have a H4 kit. The weird light switching Suzuki use doesn't matter- it switches fine. Steve. |
|
| Author: | dtchch [ Tue Jun 25, 2013 6:56 am ] |
| Post subject: | Re: HID Headlamps, wiring |
The bulb shape indicates it is an H4, and according to the listing it is meant to be high/low beam - which I don't understand because you'd think it would need more than two contacts for that. I'm going to see if I can easily set them up in my spotlights, if not they're getting thrown at the seller |
|
| Author: | Matthew [ Tue Jun 25, 2013 1:04 pm ] |
| Post subject: | Re: HID Headlamps, wiring |
Which two pins does you kit have? |
|
| Author: | dtchch [ Tue Jun 25, 2013 1:31 pm ] |
| Post subject: | Re: HID Headlamps, wiring |
Turns out its just positive and negative so it can't be a high/low setup. Nevermind, I spent a couple of hours today modifying my spotlights for the bulbs to fit and mounted them. They work well though I may get some clear spotties instead of the stock yellow ones. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|