| auszookers.com http://auszookers.com/forum/ |
|
| Power steering in 93 sierra? http://auszookers.com/forum/viewtopic.php?f=5&t=41835 |
Page 1 of 1 |
| Author: | sj70zuki [ Wed Jul 10, 2013 7:38 am ] |
| Post subject: | Power steering in 93 sierra? |
What can i use for power steering in my 93 sierra and how to fit it thank |
|
| Author: | Gwagensteve [ Wed Jul 10, 2013 8:25 am ] |
| Post subject: | Re: Power steering in 93 sierra? |
Here: viewtopic.php?f=15&t=15009 Or bolt in a complete jimmy power steering setup. |
|
| Author: | sj70zuki [ Wed Jul 10, 2013 3:59 pm ] |
| Post subject: | Re: Power steering in 93 sierra? |
Has any one in here put jimny powere streering on and made a post about it ? |
|
| Author: | Gwagensteve [ Wed Jul 10, 2013 4:14 pm ] |
| Post subject: | Re: Power steering in 93 sierra? |
I'm pretty sure there has been a thread on it somewhere. I've had a quick look, but an't find anything. As a rule of thumb though, I'd say if the donor Jimny is a G engined car, then it will all bolt in with a double row pulley on the crank. If the Jimny is M engined, I doubt the engine brackets will line up, and you might need some additional parts, such as those from the BenT kit. Regardless, the box is a 100% bolt in. I'm sure someone will recall if there has been a fitting thread. Steve. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|