My brother did an engine swap many years ago and swapped fuel with coolant lines, lets just say it didn't run well on coolant
As suggested, check for wrongly connected hoses somewhere
| auszookers.com http://auszookers.com/forum/ |
|
| need help asap! http://auszookers.com/forum/viewtopic.php?f=5&t=41850 |
Page 1 of 1 |
| Author: | Zuk_89 [ Thu Jul 11, 2013 3:47 pm ] |
| Post subject: | need help asap! |
Just finished putting my new motor In ( motor out of my old car) and drive down the road and it got over half and I open the cap and its milky Just wondering if I have put a hose on wrong that could be putting the water in the oil? It empty all the water inro the oil less then 5 mins |
|
| Author: | bumstein [ Thu Jul 11, 2013 4:18 pm ] |
| Post subject: | Re: need help asap! |
That's normally head gasket no?? |
|
| Author: | atari4x4 [ Thu Jul 11, 2013 4:23 pm ] |
| Post subject: | Re: need help asap! |
did you install a custard maker? |
|
| Author: | Zuk_89 [ Thu Jul 11, 2013 4:27 pm ] |
| Post subject: | Re: need help asap! |
bumstein wrote: That's normally head gasket no?? Yer but just hoping it could of been something like that then a blown head gasket out driving it down tve street just after finshed putting motor in |
|
| Author: | atari4x4 [ Thu Jul 11, 2013 4:31 pm ] |
| Post subject: | Re: need help asap! |
how much custard are we talking about, a little build up on the cap or is the whole insides of the rocker cover full of milky sludge? |
|
| Author: | Matthew [ Thu Jul 11, 2013 4:44 pm ] |
| Post subject: | Re: need help asap! |
Carby or efi? Cooling hose hooked to rocker cover? |
|
| Author: | Scrawny [ Thu Jul 11, 2013 6:43 pm ] |
| Post subject: | Re: need help asap! |
My brother did an engine swap many years ago and swapped fuel with coolant lines, lets just say it didn't run well on coolant As suggested, check for wrongly connected hoses somewhere |
|
| Author: | Zuk_89 [ Thu Jul 11, 2013 7:56 pm ] |
| Post subject: | Re: need help asap! |
atari4x4 wrote: how much custard are we talking about, a little build up on the cap or is the whole insides of the rocker cover full of milky sludge? The cup is white And it is carby |
|
| Author: | ozhummer [ Thu Jul 11, 2013 8:09 pm ] |
| Post subject: | Re: need help asap! |
how does the dipstick look -- Brown oil ? |
|
| Author: | Zuk_89 [ Thu Jul 11, 2013 8:12 pm ] |
| Post subject: | Re: need help asap! |
ozhummer wrote: how does the dipstick look -- Brown oil ? The dip stick is brown oil but oil cap is white |
|
| Author: | Matthew [ Thu Jul 11, 2013 9:07 pm ] |
| Post subject: | Re: need help asap! |
Zuk_89 wrote: It empty all the water inro the oil less then 5 mins I'm confused, are you saying that it used all the water in the overflow bottle or from the radiator? If its only the cap that looks milky, and the water is missing from the overflow, could it be that you didn't bleed the cooling system properly, and the milk is just condensation? |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|