| auszookers.com http://auszookers.com/forum/ |
|
| Mod Plates http://auszookers.com/forum/viewtopic.php?f=5&t=425 |
Page 1 of 1 |
| Author: | Kerrod [ Wed Oct 11, 2006 11:07 pm ] |
| Post subject: | Mod Plates |
I need a Mod Plate for 2 seat in my zook! does anyone know how u go about getting one and how much? |
|
| Author: | Westie [ Thu Oct 12, 2006 1:06 am ] |
| Post subject: | Re: Mod Plates |
You will need to have fitted NEW seat belts and the mounts must be the STD ones for them and the seats if not you may need to go to a QT Engineer if all is ok the Certification should cost for the Mod Plate & Certificate around $50-$70 but if and QT engineer has to inspect it $100-$300 that is when I use to do it some 4 years ago. Check around for prices and some guys will allow old seat belts if they are desperate for the $$$$$. It is Illeagel to sell seat belts at a wreckers/Etc. if they know you are going to use them in a car. they can sell them for tie down straps though. |
|
| Author: | royce [ Thu Oct 12, 2006 1:08 am ] |
| Post subject: | Re: Mod Plates |
its factory 4 seat, changed to 2 seat |
|
| Author: | Westie [ Thu Oct 12, 2006 1:19 am ] |
| Post subject: | Re: Mod Plates |
In that case no problems just plug all mounting holes ( Put The Bolts back)and take it to someone that is Certified to do it and you should be gone in 10-15 min and $50-$60 lighter in the pocket |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|