what year SQ625 is it... does it have the update dash?
| auszookers.com http://auszookers.com/forum/ |
|
| gv cd player http://auszookers.com/forum/viewtopic.php?f=5&t=43389 |
Page 1 of 1 |
| Author: | zooky08 [ Sat Oct 12, 2013 6:57 pm ] |
| Post subject: | gv cd player |
Does any one no off any double dins that fit the SQ625 vitara, or any cd players? Cheers |
|
| Author: | Built4thrashing [ Sat Oct 12, 2013 7:24 pm ] |
| Post subject: | Re: gv cd player |
Plenty on Ebay..... But why a double Din....... |
|
| Author: | zooky08 [ Sat Oct 12, 2013 8:18 pm ] |
| Post subject: | Re: gv cd player |
Cant find any on ebay to suit vitara. More looking for double din for the gps |
|
| Author: | fordem [ Sun Oct 13, 2013 8:11 am ] |
| Post subject: | Re: gv cd player |
I'm not certain that a double DIN will fit an SQ - the bottom opening, which usually has the clock in it, may not have the depth (front to back) space required, going from memory the heater plenum may be in the way. |
|
| Author: | zooky08 [ Sun Oct 13, 2013 8:56 am ] |
| Post subject: | Re: gv cd player |
that doesn't worry me much. is there any other CD player that can replace the stock stereo. the CD player doesn't work in ours, and we want to replace it. the stock stereo isn't really squared so how does another CD player fit? unless there isn't a CD player that's fits the SQ. |
|
| Author: | atari4x4 [ Sun Oct 13, 2013 9:33 am ] |
| Post subject: | Re: gv cd player |
what year SQ625 is it... does it have the update dash?
|
|
| Author: | Chop [ Sun Oct 13, 2013 10:05 am ] |
| Post subject: | Re: gv cd player |
Sounds like like your talking about the updated dash. |
|
| Author: | zooky08 [ Sun Oct 13, 2013 10:10 am ] |
| Post subject: | Re: gv cd player |
Its a 2003 model |
|
| Author: | atari4x4 [ Sun Oct 13, 2013 10:54 am ] |
| Post subject: | Re: gv cd player |
get another stereo/hvac surround & open it up so it's a double din size, bog, sand, sand, sand, sand, spray putty, sand, sand, prime, sand, paint & make some braketometry up. |
|
| Author: | Chop [ Sun Oct 13, 2013 12:20 pm ] |
| Post subject: | Re: gv cd player |
Yep open her up and get som measurements, see what can fit. Pretty sure you can square the opening up its more about depth of models to see what fits. |
|
| Author: | zooky08 [ Sun Oct 13, 2013 12:29 pm ] |
| Post subject: | Re: gv cd player |
Okay ill see if I can chase down another surround so I dont wreck the original one. here is what it looks like... 
|
|
| Author: | zoukshin [ Mon Oct 14, 2013 12:58 pm ] |
| Post subject: | Re: gv cd player |
Pretty sure I have seen pics of it pulled out. If I recall correctly from what I read, you need two flat hooks inserted about mid level on the sides of the unit to pull it out. I also think I have seen it replaced with a 2DIN unit, but it was sticking out a bit. Very keen to see what you uncover. My CD player hasn't died yet, but am dying for a simple 'line in' jack |
|
| Author: | zoukshin [ Mon Oct 14, 2013 1:03 pm ] |
| Post subject: | Re: gv cd player |
I take back what I said, it's a bunch of screws; see http://www.jamessimpson.co.uk/suzuki-gr ... o-removal/ Also http://paulaxford.com/html/grandvitara/ ... moval.html See for yourself, not much space in there. [edit] also found some bracket kits on ebay, but according to what I see, there is only space for a single DIN, the rest being boxed as storage of some sort |
|
| Author: | zooky08 [ Mon Oct 14, 2013 9:27 pm ] |
| Post subject: | Re: gv cd player |
Thanks mate, ill look into it. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|