auszookers.com
http://auszookers.com/forum/

best paint for lettering tyres
http://auszookers.com/forum/viewtopic.php?f=5&t=44377
Page 1 of 1

Author:  rob45x [ Sun Dec 22, 2013 7:01 am ]
Post subject:  best paint for lettering tyres

Hey guys
Just acquired a set of goodyear wrangler mtrs and they have to be mounted with the white lettering to the outside which I hate
Is just black permanent marker good enough to black the white out or does anyone have any other tricks up their sleeves

Cheers for any input

Author:  Scrawny [ Sun Dec 22, 2013 8:58 am ]
Post subject:  Re: best paint for lettering tyres

Suck it up and enjoy the tyres mounted the right way

Author:  rob45x [ Sun Dec 22, 2013 9:02 am ]
Post subject:  Re: best paint for lettering tyres

Hahahahahah

Author:  alien [ Sun Dec 22, 2013 9:04 am ]
Post subject:  Re: best paint for lettering tyres

why don't you run them on opposing sides so the lettering is on the inside?

Author:  rob45x [ Sun Dec 22, 2013 9:13 am ]
Post subject:  Re: best paint for lettering tyres

Because the tread pattern is asymmetrical and have to be mounted the right way

Author:  kenn [ Sun Dec 22, 2013 9:26 am ]
Post subject:  Re: best paint for lettering tyres

So the ones on the right run opposite direction to the left ?
Or do they make left and right side tyres ?

Author:  rob45x [ Sun Dec 22, 2013 9:33 am ]
Post subject:  Re: best paint for lettering tyres

They do run opposite to each other but if you Google Goodyear mtr kevlar and look up images you will see why they have to be mounted that way

Author:  SierraDan [ Sun Dec 22, 2013 12:01 pm ]
Post subject:  Re: best paint for lettering tyres

That different section of tread goes in the inside.
Image

Author:  1DYX [ Sun Dec 22, 2013 12:21 pm ]
Post subject:  Re: best paint for lettering tyres

Yes, your Sharpie is suitable for blackening the white letters, but you will have to redo them from time to time.
Don't try and buff the white letters off, unless you want whitewalls....

You can also buy black paint suitable for rubber, but you will still need to redo from time to time...

Author:  rob45x [ Sun Dec 22, 2013 12:29 pm ]
Post subject:  Re: best paint for lettering tyres

Yeah the different section of rubber goes Inside. Correct
I guess a sharpie pen is the way to go

Author:  henno [ Sun Dec 22, 2013 12:35 pm ]
Post subject:  Re: best paint for lettering tyres

Wouldn't the cost of the paint be equal to (or close to) the price to refit the tyres on the rims the way you want? Am I missing something here? Someone on AZ might even do it for you for a few beers or some such.

EDIT: I answered my own question. Yes, I was missing something... more beers in my face.

Author:  Blkfxx [ Sun Dec 22, 2013 12:43 pm ]
Post subject:  Re: best paint for lettering tyres

Maybe even tyre black?

Author:  rob45x [ Sun Dec 22, 2013 12:43 pm ]
Post subject:  Re: best paint for lettering tyres

Haha I'm a mechanic dude. I'll fit the tyres and flip Em all day long but they've been designed that way for a reason

I just don't like the white lettering. Every time I see a 4by with white lettering just makes me think what a hard ass lol

Author:  Scrawny [ Sun Dec 22, 2013 12:58 pm ]
Post subject:  Re: best paint for lettering tyres

I'd be interested to see if there actually was a difference running them the wrong way.

Author:  SierraDan [ Sun Dec 22, 2013 1:19 pm ]
Post subject:  Re: best paint for lettering tyres

Not a massive difference, even as claimed by Goodyear. But thats the intended way to mount them.

In the larger sizes on "race cars" they swear by running them with that bit of tread on the inside.

Author:  just_cruizin [ Sun Dec 22, 2013 6:39 pm ]
Post subject:  Re: best paint for lettering tyres

interestly they do look almost uni-directional. The drivers side tyre would pull water into the centre and create an aquaplane situation.

mind you i like to experiment and have run Silverstone Extremes in reverse on the front of the sierra to see if it helps to pull the car onto rocks etc rather then push off.

Author:  banga [ Sun Dec 22, 2013 7:14 pm ]
Post subject:  Re: best paint for lettering tyres

rob45x wrote:
Haha I'm a mechanic dude. I'll fit the tyres and flip Em all day long but they've been designed that way for a reason

I just don't like the white lettering. Every time I see a 4by with white lettering just makes me think what a hard ass lol



I hate white writing on outside as well it looks good for awhile and than looks shit as it wears.

Author:  BlueSuzy [ Sun Dec 22, 2013 7:54 pm ]
Post subject:  Re: best paint for lettering tyres

Put white on insides. End thread.

They are directional, not corner directional

Paint the letters, Its just going to show again.

Author:  rob45x [ Sun Dec 22, 2013 9:03 pm ]
Post subject:  Re: best paint for lettering tyres

I've heard many stories of people running aggressive directional tyres on backwards for more grabbing traction on rocks etc. Obviously they wouldn't work for shit in the wet

Author:  Scrawny [ Sun Dec 22, 2013 9:17 pm ]
Post subject:  Re: best paint for lettering tyres

BlueSuzy wrote:
They are directional, not corner directional


They're asymmetrical, not directional

Author:  SierraDan [ Mon Dec 23, 2013 8:08 am ]
Post subject:  Re: best paint for lettering tyres

Scrawn wrote:
BlueSuzy wrote:
They are directional, not corner directional


They're asymmetrical, not directional

Yep x2

Author:  BlueSuzy [ Mon Dec 23, 2013 4:27 pm ]
Post subject:  Re: best paint for lettering tyres

And whoopdy doo

Everyday use, you wouldn't feel a difference.

Author:  SierraDan [ Tue Dec 24, 2013 4:56 am ]
Post subject:  Re: best paint for lettering tyres

My treps on backwards dont feel any different either. Its still the way they go.

Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/