auszookers.com
http://auszookers.com/forum/

Factory Jimny Roof Rail replacement options
http://auszookers.com/forum/viewtopic.php?f=5&t=46658		 Page 1 of 1
Author:  NickCooper [ Tue Jun 17, 2014 3:58 pm ]
Post subject:  Factory Jimny Roof Rail replacement options
Hi all,

I have accidentally smashed my factory Jimny roof racks so have taken them off. My only issue is now I have 8 studs sticking out of my roof. What are some options available that are able to utilize these studs (can be a cross rail design instead of a length ways rail). I have found these Rhino Racks and was told that I can cut the bar itself down to the required length to mount to the studs. Anyone know if this is true?
Also does anyone know of any other options that I could use? Thanks in advance.
Image
Author:  Jim_Aus [ Wed Jun 18, 2014 10:03 am ]
Post subject:  Re: Factory Jimny Roof Rail replacement options
you can screw them out, if you dont want a roof rack...... thats all i did with mine...
Author:  NickCooper [ Wed Jun 18, 2014 11:35 am ]
Post subject:  Re: Factory Jimny Roof Rail replacement options
I've got a roof basket with a light bar on it that I want to put on the roof. I had it all mounted then the rails smashed
Author:  jake84 [ Wed Jun 18, 2014 1:21 pm ]
Post subject:  Re: Factory Jimny Roof Rail replacement options
take a pic of the roof and post as this will be much easier to help you
Author:  NickCooper [ Wed Jun 18, 2014 3:52 pm ]
Post subject:  Re: Factory Jimny Roof Rail replacement options
Here is some pics of the roof as it is now. Also a pic of the roof rails. I will get some dimensions of the stud distances.
Image
Image
Image
Image
Author:  pete_79 [ Wed Jun 18, 2014 4:00 pm ]
Post subject:  Re: Factory Jimny Roof Rail replacement options
If you've already got the basket and gear for the racks maybe you could fab up a set of feet and weld to your basket to permanently mount it using those 8 studs.

Something like this setup.
This basket looks like it might be an ARB one off a bigger rig that was cut down and had feet welded on it.

Image


I think this is a great idea and if I ever broke my rails I would do something simular. My basket stays on the car all the time so it might as well be bolted directly to the roof and get rid of the weak cross bars.
Author:  NickCooper [ Wed Jun 18, 2014 5:08 pm ]
Post subject:  Re: Factory Jimny Roof Rail replacement options
Far front stud to the far back stud measures 1180mm

From left stud to right stud is roughly 1040mm

pete_79 wrote:
If you've already got the basket and gear for the racks maybe you could fab up a set of feet and weld to your basket to permanently mount it using those 8 studs.

Something like this setup.
This basket looks like it might be an ARB one off a bigger rig that was cut down and had feet welded on it.

Image


I think this is a great idea and if I ever broke my rails I would do something simular. My basket stays on the car all the time so it might as well be bolted directly to the roof and get rid of the weak cross bars.

I was thinking about making a set of feet for it but I need the basket removable. I have found these racks though that run in a set of tracks. Should be able to mount to my roof. They also have the swivel feet for being mounted on a curved roof (which it is).
http://www.rhinorack.com.au/products/ro ... ack_ja2542
I will take my Jimny to ARB and see what they can recommend.
Author:  pete_79 [ Wed Jun 18, 2014 5:50 pm ]
Post subject:  Re: Factory Jimny Roof Rail replacement options
NickCooper wrote:
I will take my Jimny to ARB and see what they can recommend.


Good luck with that...... I hope your local ARB guys are much better than the bunch of pricks near my place.

I was looking at roof racks and a basket for our Jimny so I went in to see what options ARB had, I walked out of that shop so pissed off with the shit service and terrible attitude they gave me. I couldn't believe how much the fat bastard behind the counter pissed me off that day.
The racks and basket was the very first thing we bought for the Jimny and after that terrible experience with ARB I swore NEVER to spend 1 cent with those pricks. And so far so good.
Author:  NickCooper [ Wed Jun 18, 2014 6:05 pm ]
Post subject:  Re: Factory Jimny Roof Rail replacement options
pete_79 wrote:
NickCooper wrote:
I will take my Jimny to ARB and see what they can recommend.


Good luck with that...... I hope your local ARB guys are much better than the bunch of pricks near my place.

I was looking at roof racks and a basket for our Jimny so I went in to see what options ARB had, I walked out of that shop so pissed off with the shit service and terrible attitude they gave me. I couldn't believe how much the fat bastard behind the counter pissed me off that day.
The racks and basket was the very first thing we bought for the Jimny and after that terrible experience with ARB I swore NEVER to spend 1 cent with those pricks. And so far so good.

I've been to ARB a couple of times now and the service has been excellent. Which ARB did you have an issue with?
Author:  got_bar_work [ Thu Jun 19, 2014 9:55 am ]
Post subject:  Re: Factory Jimny Roof Rail replacement options
Most stores are like that. Unless u drive a patrol or cruiser they don't want to talk to u
Author:  jake84 [ Thu Jun 19, 2014 11:43 am ]
Post subject:  Re: Factory Jimny Roof Rail replacement options
yep true

if its not a nissen or a Toyota or land rover dont bother
its like having a pissing comp with some of them guys.
Author:  atari4x4 [ Thu Jun 19, 2014 11:53 am ]
Post subject:  Re: Factory Jimny Roof Rail replacement options
i'd hit up 31zook & see if he'll recreate this for cash monies, has to be one of the neatest solutions going around.

Image

Image

Image
Author:  NickCooper [ Sat Jun 21, 2014 9:02 am ]
Post subject:  Re: Factory Jimny Roof Rail replacement options
Well I'm going into ARB now to have a look. However, after some thinking I may end up making one.
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/