| auszookers.com http://auszookers.com/forum/ |
|
| Sierra vs Samurai http://auszookers.com/forum/viewtopic.php?f=5&t=47071 |
Page 1 of 1 |
| Author: | SORT [ Sun Jul 20, 2014 2:47 pm ] |
| Post subject: | Sierra vs Samurai |
Does anyone have any experience with samuri parts (imported from USA) bolting into an AUS model sierra of the same year? In particular the front seat rails (other then them being on the opposite side of the cabin) |
|
| Author: | 31zook [ Sun Jul 20, 2014 2:52 pm ] |
| Post subject: | Re: Sierra vs samuri |
Same same except for some steering stuff being LHD |
|
| Author: | Gwagensteve [ Sun Jul 20, 2014 3:03 pm ] |
| Post subject: | Re: Sierra vs samuri |
I'm pretty sure the seat rails will work. I think the bolt pattern is symmetrical, so the driver's side seat rails will work in either the left or the right. Whilst I can't confirm this, I can confirm that the frames are identical on both sides of the Sierra tray back, which uses a driver's side seat mount on both driver and passenger sides, so following that logic, the right and left hand drive seat rails should be the same. Steve. PS what rails are you looking at purchasing? |
|
| Author: | SORT [ Sun Jul 20, 2014 7:03 pm ] |
| Post subject: | Re: Sierra vs samuri |
Found some fixed bucket seat adapter rails for 88-96 sierra online. They are quite expensive so was looking for clarification before purchasing Thanks all |
|
| Author: | Pooke [ Thu Jul 24, 2014 6:24 am ] |
| Post subject: | Re: Sierra vs Samurai |
In my 95 NZ Model Samurai the seat mounts are quite different from left to right. Can take photos if you like |
|
| Author: | Gwagensteve [ Thu Jul 24, 2014 6:54 am ] |
| Post subject: | Re: Sierra vs Samurai |
That's the case for all Sierras and Samurais (except tray backs) it's whether they are just mirrored in the LHD format. Neofitou might be able to help with this. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|