auszookers.com http://auszookers.com/forum/
F10a head rocker shafts http://auszookers.com/forum/viewtopic.php?f=5&t=47228	Page 1 of 1

---

Author:	jonno_racing [ Thu Jul 31, 2014 10:40 am ]
Post subject:	F10a head rocker shafts
How in hell do you get the bolts out that hold the rocker shafts in? Mine are 4mm key drive and I have stuffed my teng tools impact driver bit.. I'm a bit stuck.

---

Author:	killazook [ Thu Jul 31, 2014 2:16 pm ]
Post subject:	Re: F10a head rocker shafts
Flog them with a hammer is the way I got them and mine where all Phillips head

---

Author:	sideways [ Thu Jul 31, 2014 3:32 pm ]
Post subject:	Re: F10a head rocker shafts
Easy outs every bloody time.

---

Author:	jonno_racing [ Thu Jul 31, 2014 8:07 pm ]
Post subject:	Re: F10a head rocker shafts
Sorry for the poor quality pics... 25min I had them all out $5.50 for a replacement new set.

---

Author:	sideways [ Thu Jul 31, 2014 8:27 pm ]
Post subject:	Re: F10a head rocker shafts
Time to invest in a set of easyouts dude.

---

Author:	atari4x4 [ Thu Jul 31, 2014 8:35 pm ]
Post subject:	Re: F10a head rocker shafts
i think he just invented some

---

Author:	killazook [ Fri Aug 01, 2014 6:39 am ]
Post subject:	Re: F10a head rocker shafts
Careful with easy outs snap one of those and then your really up shits creek

---

Author:	want33s [ Fri Aug 01, 2014 7:06 am ]
Post subject:	Re: F10a head rocker shafts
Those screws come out quite easily if you know the trick. I use a small ball pain hammer with ball side on the screw slots. Hit the hammer with another hammer to jar the screw then remove with a large phillips head screwdriver as normal.

---

Author:	jonno_racing [ Fri Aug 01, 2014 7:56 am ]
Post subject:	Re: F10a head rocker shafts
I tried a similar idea... still said nope. Welding them took 20min for all 10

---

Page 1 of 1	All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/