| auszookers.com http://auszookers.com/forum/ |
|
| Jimny manual hubs http://auszookers.com/forum/viewtopic.php?f=5&t=47352 |
Page 1 of 1 |
| Author: | sarahsBIGJIM [ Sun Aug 10, 2014 7:58 pm ] |
| Post subject: | Jimny manual hubs |
What manual hubs are people running on there Jimnys? Will manual hubs off any other zooks fit a jimny? |
|
| Author: | zukenutter [ Sun Aug 10, 2014 8:14 pm ] |
| Post subject: | Re: Jimny manual hubs |
I'm running factory Sierra hubs on mine. I'm think Vitara hubs are also suitable. Some people have used AVM too |
|
| Author: | sarahsBIGJIM [ Sun Aug 10, 2014 8:21 pm ] |
| Post subject: | Re: Jimny manual hubs |
Ok thanks. We were coming home after a 4by today and noticed random viberations at speeds up to 50k then when parking it up at home realised that even though we had transfer in 2wd it was binding up on tar like it was in high 4 still so thinking time for manual hubs |
|
| Author: | zukenutter [ Sun Aug 10, 2014 8:25 pm ] |
| Post subject: | Re: Jimny manual hubs |
Locker in the front? |
|
| Author: | zukenutter [ Sun Aug 10, 2014 8:26 pm ] |
| Post subject: | Re: Jimny manual hubs |
I forget, is yours VVT model? |
|
| Author: | sarahsBIGJIM [ Sun Aug 10, 2014 9:01 pm ] |
| Post subject: | Re: Jimny manual hubs |
Not vvt it's the g13bb. Lokka in back |
|
| Author: | zukenutter [ Sun Aug 10, 2014 9:17 pm ] |
| Post subject: | Re: Jimny manual hubs |
Must have failed to disengage 4x4 if it was binding |
|
| Author: | sarahsBIGJIM [ Mon Aug 11, 2014 4:11 pm ] |
| Post subject: | Re: Jimny manual hubs |
Yeah I usually have to reverse a few feet but might have forgotten |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|