| auszookers.com http://auszookers.com/forum/ |
|
| G13bb down on power http://auszookers.com/forum/viewtopic.php?f=5&t=47476 |
Page 1 of 1 |
| Author: | 31zook [ Wed Aug 20, 2014 11:36 am ] |
| Post subject: | G13bb down on power |
Not sure if my motor is on its last legs, but it blows smoke on start up and I think is loosing power gradually. Is it likely that the O2 sensor is gunked up of needs replacing? Its also starting (all of a sudden) using 18L/100kms. Which sucks. If anyone can shed some light I'd love to get this sorted. Wilso 
|
|
| Author: | atari4x4 [ Wed Aug 20, 2014 11:55 am ] |
| Post subject: | Re: G13bb down on power |
 Wilso, have you pulled the error codes?
|
|
| Author: | 31zook [ Wed Aug 20, 2014 12:11 pm ] |
| Post subject: | Re: G13bb down on power |
Do mark I jimnys have obd ports? Plus I don't have a scanner |
|
| Author: | Jezza86 [ Wed Aug 20, 2014 12:25 pm ] |
| Post subject: | Re: G13bb down on power |
cleaned the maf sensor recently? worth a go and its only 2 scrws to pull out and a spray with some contact cleaner. |
|
| Author: | JrZook [ Wed Aug 20, 2014 12:27 pm ] |
| Post subject: | Re: G13bb down on power |
What color smoke? I think it's trying to tell you that its j24+auto time 
|
|
| Author: | 31zook [ Wed Aug 20, 2014 1:41 pm ] |
| Post subject: | Re: G13bb down on power |
Haha I wish I was ready to do that yet lol. Grey smoke Ill look at the MAF this arvo. |
|
| Author: | atari4x4 [ Wed Aug 20, 2014 3:40 pm ] |
| Post subject: | Re: G13bb down on power |
31zook wrote: Do mark I jimnys have obd ports? Plus I don't have a scanner I don't know Wilso, bung your head under the dashboard on both sides? In your engine bay adventures have you seen the little white diagnostic plug? Has 6 ports stacked 3 on 3, but not all are populated. |
|
| Author: | droverdave [ Wed Aug 20, 2014 4:06 pm ] |
| Post subject: | Re: G13bb down on power |
18L/100km sais to me your engine is running uber rich which is most likely a sensor issue which is causing the ecu to go into limp mode if it has one, or just causing the ecu to give the wrong fuel or ignition advance leading to your lack of power. To find the dead sensor its either trial and error or find the code. some info in here about finding the codes/OBD port if its refering to the same motor as yours. viewtopic.php?f=5&t=38996 |
|
| Author: | JrZook [ Wed Aug 20, 2014 4:09 pm ] |
| Post subject: | Re: G13bb down on power |
No CEL? |
|
| Author: | 31zook [ Wed Aug 20, 2014 6:56 pm ] |
| Post subject: | Re: G13bb down on power |
No, no CEL. Just a seat of my pants feels thing. Thanks for the link, ill have a look tomorrow arvo as today has gotten away from me... |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|