It is currently Sun Jan 21, 2018 4:44 pm
Board index » Talking About Stuff » Suzuki Talk



Post new topic Reply to topic  [ 9 posts ] 
Author Message

Offline
User avatar

Joined: Tue Apr 16, 2013 12:19 pm
Posts: 275
Vehicle: hkbjk

Post Posted: Tue Nov 25, 2014 12:19 pm 
Reply with quote Top  
Has anyone replaced the bearing in their tensioner pulley (AC and Power Steering 1999 Jimny)? Mine sounds like the bearing has issues and looking at the cost for a new pulley assembly $149! I wonder if anyone has pressed out the old bearing and pressed in a new one and if so do you remember the bearing you used?

 Profile  

Offline

Joined: Wed Dec 19, 2012 8:13 am
Posts: 685
Vehicle: 85 ' Drover

Post Posted: Tue Nov 25, 2014 2:49 pm 
Reply with quote Top  
Its more than likely a standard bearing size, so if you measure it and ring up a bearing shop they should be able to supply you with something that will work.

Assuming it can be pressed out/in etc.

 Profile  

Offline

Joined: Wed May 01, 2013 8:35 pm
Posts: 70
Vehicle: Suzuki Sierra Trayback

Post Posted: Tue Nov 25, 2014 8:18 pm 
Reply with quote Top  
Done it a few times on Toyota's, bearing cost around $9. Was told that the actual V pulley does suffer from wear in a high klm engine.
Nick

 Profile  

Offline
User avatar

Joined: Tue Apr 16, 2013 12:19 pm
Posts: 275
Vehicle: hkbjk

Post Posted: Wed Nov 26, 2014 6:48 am 
Reply with quote Top  
Ok thanks, I've taken then pulley off so will go to a bearing shop and see what I can find to suit

 Profile  

Offline
User avatar

Joined: Tue Apr 16, 2013 12:19 pm
Posts: 275
Vehicle: hkbjk

Post Posted: Thu Dec 04, 2014 5:34 am 
Reply with quote Top  
Cost for the new bearing was $15 as opposed to $130 for a new pulley and bearing from online. Very simple to tap out the bearing and tap in the new one now is running like a champion again.

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Fri Jun 06, 2014 9:26 am
Posts: 847
Vehicle: 2000 Jimny

Post Posted: Thu Dec 04, 2014 9:28 am 
Reply with quote Top  
i changed the pulley in mine not too long ago, sourced an ebay unit for about $50 so you're in front of me at $15.

 Profile  

Offline
User avatar

Joined: Tue Apr 16, 2013 12:19 pm
Posts: 275
Vehicle: hkbjk

Post Posted: Thu Dec 04, 2014 9:49 am 
Reply with quote Top  
That was for the whole pulley Im guessing? the $15 was for the bearing only as I did not need to replace the pulley

 Profile  

Offline

Joined: Sun Jan 29, 2017 9:06 am
Posts: 19
Location: Ocean View North Brisbane
Vehicle: Suzuki Jimny 2010

Post Posted: Sat Dec 23, 2017 1:46 pm 
Reply with quote Top  
Bearing is 80mm OD, 50mm ID and 16mm wide. Sealed both sides.

6010 - (2RS - I think 2RS means it has seals both sides). Ask the bearing shop for best one to suit application

_________________
2010 Jimny, M15A, 3" kit, 215/75R15, castor bushes (it's not enough!), rear shock btm mount brackets, panhard rod mounts, steering damper,
tx bash plate, radius arm bash plates, dual batts, headers, winch, side steps, rooftop tent, Joying HU, LED h/lts & d/lts,

 Profile  

Offline

Joined: Sun Jan 29, 2017 9:06 am
Posts: 19
Location: Ocean View North Brisbane
Vehicle: Suzuki Jimny 2010

Post Posted: Sat Dec 23, 2017 1:47 pm 
Reply with quote Top  
That's for M13A engine

_________________
2010 Jimny, M15A, 3" kit, 215/75R15, castor bushes (it's not enough!), rear shock btm mount brackets, panhard rod mounts, steering damper,
tx bash plate, radius arm bash plates, dual batts, headers, winch, side steps, rooftop tent, Joying HU, LED h/lts & d/lts,

 Profile  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 9 posts ] 

Jump to:  


Who is online

Users browsing this forum: Bing [Bot], Google [Bot], Google Adsense [Bot], jw6277 and 8 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
Untitled Document


Untitled Document


Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group :: Style based on FI Subice by phpBBservice.nl :: All times are UTC + 10 hours