| auszookers.com http://auszookers.com/forum/ |
|
| King Springs http://auszookers.com/forum/viewtopic.php?f=5&t=488 |
Page 1 of 1 |
| Author: | Troll [ Tue Nov 07, 2006 12:37 am ] |
| Post subject: | King Springs |
Im after the part number for 2 inch lifted rear king springs or another brand that gives about 3 inches of lift |
|
| Author: | royce [ Tue Nov 07, 2006 12:45 am ] |
| Post subject: | Re: King Springs |
Suz-006 is SWB lifted or LWB standard height SUZ-007 is SWB EHD lifted SUZ-008 is LWB lifted I used SUZ-006 with the short leaf removed from them as they are too stiff, rather flex over lift anyday |
|
| Author: | Troll [ Tue Nov 07, 2006 1:07 am ] |
| Post subject: | Re: King Springs |
do the extra heavy duty give more lift are they really stiff? |
|
| Author: | royce [ Tue Nov 07, 2006 1:32 am ] |
| Post subject: | Re: King Springs |
kings wont make more than 50mm lift, even if you give em specs for custom springs they will just be more leaf or thincker leafs |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|