Bar is solidly mounted and is used for a-frame towing
| auszookers.com http://auszookers.com/forum/ |
|
| Tow hook mount strength http://auszookers.com/forum/viewtopic.php?f=5&t=49012 |
Page 1 of 1 |
| Author: | Pooke [ Thu Jan 15, 2015 6:44 pm ] |
| Post subject: | Tow hook mount strength |
Quick question. Would a tow hook bolted lengthwise on a solidly mounted 50x50x2mm piece square tube without crush tubes work or totally inadequate? This piece is 150mm long and solidly mounted with gussets but would the bolts tear through without crush tubes? There is no way to get them in there. |
|
| Author: | jdk81 [ Thu Jan 15, 2015 7:21 pm ] |
| Post subject: | Re: Tow hook mount strength |
Whacking bolts through it without crush tubes, I wouldn't do it. Perhaps a drawing/sketch/pic of what you're trying to do, and where it is going would be helpful, so we could provide suggestions? |
|
| Author: | Pooke [ Thu Jan 15, 2015 7:37 pm ] |
| Post subject: | Re: Tow hook mount strength |
Bar is solidly mounted and is used for a-frame towing
|
|
| Author: | atari4x4 [ Thu Jan 15, 2015 8:12 pm ] |
| Post subject: | Re: Tow hook mount strength |
drill a lager hole for the crush tube to fit, then weld it in? |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|