| auszookers.com http://auszookers.com/forum/ |
|
| wiring led lights http://auszookers.com/forum/viewtopic.php?f=5&t=5068 |
Page 1 of 1 |
| Author: | seen [ Fri Jun 05, 2009 11:30 pm ] |
| Post subject: | wiring led lights |
i m goin to buy new led lights for my rear bar and i want to no can i wire them striaght up to the old light cables and do i need anything else to make it work right thanks sean |
|
| Author: | want33s [ Sat Jun 06, 2009 12:27 am ] |
| Post subject: | Re: wiring led lights |
Led's wire up the same as the old lights.. You may have to replace your indicator flasher can with an LED flasher unit to stop them flashing ridiculously fast. |
|
| Author: | Saam [ Sat Jun 06, 2009 5:43 am ] |
| Post subject: | Re: wiring led lights |
or put in a resistor like i did |
|
| Author: | Mike [ Sat Jun 06, 2009 7:01 am ] |
| Post subject: | Re: wiring led lights |
be careful with the wiring read the instruction the wire colours aren't what you would expect them to be (red isn't positive black isn't negetive etc.) |
|
| Author: | want33s [ Sat Jun 06, 2009 1:11 pm ] |
| Post subject: | Re: wiring led lights |
Mike wrote: be careful with the wiring read the instruction the wire colours aren't what you would expect them to be (red isn't positive black isn't negetive etc.)
Most of the LEDs I've wired up used RED as BRAKE.... YELLOW as indicator... WHITE as TAILLIGHT and BLACK as EARTH but this may not be the case with all of them. |
|
| Author: | royce [ Sat Jun 06, 2009 1:20 pm ] |
| Post subject: | Re: wiring led lights |
A lot of em are same as trailer wiring red is brake brown is tail yellow or green is indicator white is earth black is reverse youll also need a flasher unit that doesnt speed up with less load, Tridon make a road train one that fits the plug but I am over telling people about it cause nobody has ever been succesful in buying one and plugging it in without setting fire to something 
|
|
| Author: | Rockhopper [ Sat Jun 06, 2009 1:54 pm ] |
| Post subject: | Re: wiring led lights |
royce wrote: A lot of em are same as trailer wiring
red is brake brown is tail yellow or green is indicator white is earth black is reverse youll also need a flasher unit that doesnt speed up with less load, Tridon make a road train one that fits the plug but I am over telling people about it cause nobody has ever been succesful in buying one and plugging it in without setting fire to something How the hell do you set fire to something plugging in a flasher can??? 
|
|
| Author: | want33s [ Sat Jun 06, 2009 2:18 pm ] |
| Post subject: | Re: wiring led lights |
These are available at most auto parts shops. I fitted one to my car which is ALL LEDs and it plugged straight in and works fine. |
|
| Author: | royce [ Sat Jun 06, 2009 4:24 pm ] |
| Post subject: | Re: wiring led lights |
Rockhopper wrote: royce wrote: A lot of em are same as trailer wiring red is brake brown is tail yellow or green is indicator white is earth black is reverse youll also need a flasher unit that doesnt speed up with less load, Tridon make a road train one that fits the plug but I am over telling people about it cause nobody has ever been succesful in buying one and plugging it in without setting fire to something How the hell do you set fire to something plugging in a flasher can??? I dont know, the flasher is 2 pin, the socket is 3, so it can go in a right way and a wrong way, didnt matter how many times you tell people to find the power pin 1st they jsut shrug and figure they will jsut plug it in and see |
|
| Author: | seen [ Sat Jun 06, 2009 11:29 pm ] |
| Post subject: | Re: wiring led lights |
thanks for the help i will post some pics n that when i am done |
|
| Author: | zukmeista [ Mon Dec 27, 2010 3:53 am ] |
| Post subject: | Re: wiring led lights |
So where does it go? |
|
| Author: | Scrawny [ Mon Dec 27, 2010 4:01 am ] |
| Post subject: | Re: wiring led lights |
zukmeista wrote: So where does it go?
Where does what go?
|
|
| Author: | want33s [ Mon Dec 27, 2010 5:23 am ] |
| Post subject: | Re: wiring led lights |
Flasher can is located at the top of the fuse box... Near the accellerator pedal. |
|
| Author: | zooky08 [ Mon Dec 27, 2010 5:50 am ] |
| Post subject: | Re: wiring led lights |
i only have leads on the rear and my flasher tickers really fast. would getting a led flasher box fix this. or are they only for cars that have leds all round. |
|
| Author: | benji [ Mon Dec 27, 2010 5:55 am ] |
| Post subject: | Re: wiring led lights |
royce wrote: A lot of em are same as trailer wiring
red is brake brown is tail yellow or green is indicator white is earth black is reverse youll also need a flasher unit that doesnt speed up with less load, Tridon make a road train one that fits the plug but I am over telling people about it cause nobody has ever been succesful in buying one and plugging it in without setting fire to something that would be the case for all the ones ive done so far |
|
| Author: | skyman [ Wed Dec 29, 2010 11:54 pm ] |
| Post subject: | Re: wiring led lights |
zooky08 wrote: i only have leads on the rear and my flasher tickers really fast.
would getting a led flasher box fix this. or are they only for cars that have leds all round. You can mix and match incandescent with the LED's, the electronic flashers blink at the same speed no matter what is connected. I tired to use the resistors with the stock flasher and it was just a mess. The wires broke off one of the resistors so i had to buy another. Then the resistors got so hot they melted the electrical tape. The resistors also defeat the purpose of having LED's because the resistors draw just as much amperage as the old lights. I found an electronic flasher and all my lights have worked great since. I can also leave my LED park lights on for over 14 hours and it doesn't drain my battery. The only downfall is that the flash will not speed up when a light is out or disconnected. LED's totally rock. armsup |
|
| Author: | Ridge [ Fri Oct 05, 2012 10:14 am ] |
| Post subject: | Re: wiring led lights |
Can anyone tell me which of these is a suitable flasher to suit some 12v led indicators? http://www.supercheapauto.com.au/online ... escription or http://www.supercheapauto.com.au/online ... escription This kind of stuff really isn't my thing |
|
| Author: | zukmeista [ Fri Oct 05, 2012 10:21 am ] |
| Post subject: | Re: wiring led lights |
Neither of those will work properly, you need a non load sensing flasher unit, the LED's place less load on the electrical system, which is why they flash faster. |
|
| Author: | Ridge [ Fri Oct 05, 2012 10:54 am ] |
| Post subject: | Re: wiring led lights |
Do you have a part number for one that would work? |
|
| Author: | zukmeista [ Fri Oct 05, 2012 11:29 am ] |
| Post subject: | Re: wiring led lights |
Mine has this on it: Bosch P122 Electronic Flasher 010410 |
|
| Author: | DarkHorse [ Fri Oct 05, 2012 12:19 pm ] |
| Post subject: | Re: wiring led lights |
Have at look at aftermarket motorbike units, they change to LED all the time. |
|
| Author: | Ridge [ Fri Oct 05, 2012 3:11 pm ] |
| Post subject: | Re: wiring led lights |
Thanks for the info, I will follow up the Bosch unit. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|