hello again
which is better for SJ410k with baleno 1600 16v engine?
Jimny G13bb extractors? if so...which kind?
or the Vitara 16v - he original or the headers sold in the states?
thank you very much again....
| auszookers.com http://auszookers.com/forum/ |
|
| what are the best extractors for sierra with baleno engine? http://auszookers.com/forum/viewtopic.php?f=5&t=51302 |
Page 1 of 1 |
| Author: | sagi [ Wed Nov 04, 2015 6:05 pm ] |
| Post subject: | what are the best extractors for sierra with baleno engine? |
hello again which is better for SJ410k with baleno 1600 16v engine? Jimny G13bb extractors? if so...which kind? or the Vitara 16v - he original or the headers sold in the states? thank you very much again....
|
|
| Author: | Gwagensteve [ Wed Nov 04, 2015 6:24 pm ] |
| Post subject: | Re: what are the best extractors for sierra with baleno engi |
G13BB Jimny extractors normally turn to position the catalytic converter under the gearbox, which is unhelpful in a Sierra. G16B Vitara/tracker/sidekick extractors might foul the engine mount and/or be close to the chassis, but at least run parallel to the chassis so it's easier to make the rest of the exhaust work. Steve. |
|
| Author: | J--A--C--K [ Wed Nov 04, 2015 6:42 pm ] |
| Post subject: | Re: what are the best extractors for sierra with baleno engi |
There's an eBay seller with extractors advertised as for a Sierra with a g16b, I have never owned them just seen them on there |
|
| Author: | MrRocky [ Wed Nov 04, 2015 7:43 pm ] |
| Post subject: | Re: what are the best extractors for sierra with baleno engi |
Stock jimny manifold will make just as much power as ebay 4-2-1 extractors and save $$$ |
|
| Author: | sagi [ Wed Nov 04, 2015 8:30 pm ] |
| Post subject: | Re: what are the best extractors for sierra with baleno engi |
MrRocky wrote: Stock jimny manifold will make just as much power as ebay 4-2-1 extractors and save $$$ there is a problem to find a stock jimny extractors where in my country... so i think i'll go with the vit's 16v manifold... |
|
| Author: | Mickc [ Wed Nov 04, 2015 9:07 pm ] |
| Post subject: | Re: what are the best extractors for sierra with baleno engi |
Got set of these http://www.ebay.com.au/itm/Suzuki-Sierr ... hrTU58R-jw Clears as supplied, but I trimmed of return on back of stock engine mount for additional clearance. |
|
| Author: | Gwagensteve [ Thu Nov 05, 2015 5:53 am ] |
| Post subject: | Re: what are the best extractors for sierra with baleno engi |
16v vitara manifolds crack and have a nasty downpipe arrangement that falls apart internally. |
|
| Author: | 4x4xzook [ Thu Nov 05, 2015 7:34 am ] |
| Post subject: | Re: what are the best extractors for sierra with baleno engi |
im guessing getting a set made might cost more ? |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|