| auszookers.com http://auszookers.com/forum/ |
|
| bonnet brace seams splitting http://auszookers.com/forum/viewtopic.php?f=5&t=51375 |
Page 1 of 1 |
| Author: | damø [ Mon Nov 16, 2015 4:25 pm ] |
| Post subject: | bonnet brace seams splitting |
been digging around and cant find any info on the bonnet brace separating from the skin. alot of the seams have come apart as shown in the picture. the bonnet has taken an impact at some point on the drivers side, which is where the worst of the seam separation is. is this worth repairing, and if so how would be the best way to go about it? 
|
|
| Author: | tanshi [ Mon Nov 16, 2015 4:58 pm ] |
| Post subject: | Re: bonnet brace seams splitting |
most bonnets ive seen are like that fill the gaps with sikaflex |
|
| Author: | Reubs [ Mon Nov 16, 2015 6:37 pm ] |
| Post subject: | Re: bonnet brace seams splitting |
Ditto. All my Suzukis are like that but I can't see why it would be a problem. |
|
| Author: | greenzook89 [ Mon Nov 16, 2015 10:12 pm ] |
| Post subject: | Re: bonnet brace seams splitting |
Its a pain when you go to repair a dent on the bonnet and its "floppy". As Tanshi mentioned, fill the gaps with sika. |
|
| Author: | damø [ Tue Nov 17, 2015 4:34 pm ] |
| Post subject: | Re: bonnet brace seams splitting |
thanks lads |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|