auszookers.com
http://auszookers.com/forum/

MAXI TRAC springs
http://auszookers.com/forum/viewtopic.php?f=5&t=525
Page 1 of 1

Author:  dino [ Thu Nov 30, 2006 9:38 pm ]
Post subject:  MAXI TRAC springs

any1 tried the maxi trac brand of 50mm raised springs available from repco?? they r very well priced! any info/opinions would be great

mitch

Author:  royce [ Thu Nov 30, 2006 10:29 pm ]
Post subject:  Re: MAXI TRAC springs

cheap = crap with leaf springs

:wink:

Author:  steve [ Fri Dec 01, 2006 12:20 am ]
Post subject:  Re: MAXI TRAC springs

well priced? how much are they?

Author:  dino [ Fri Dec 01, 2006 2:25 am ]
Post subject:  Re: MAXI TRAC springs

50 bucks a spring

Author:  steve [ Fri Dec 01, 2006 8:44 pm ]
Post subject:  Re: MAXI TRAC springs

gees eh, that's like half the price of the others 8O

Author:  dj181 [ Fri Dec 01, 2006 9:19 pm ]
Post subject:  Re: MAXI TRAC springs

if u dont want to spend a lot on springs i would reccomend dobinsons. i think they cost me about $60 a spring and they seemed to work ok. just make sure u get 2 right rear springs for the back, not right and left

Author:  dino [ Fri Dec 01, 2006 10:41 pm ]
Post subject:  Re: MAXI TRAC springs

y get rights for the back??? how high are they and how hard?

mitch

Author:  dj181 [ Fri Dec 01, 2006 11:26 pm ]
Post subject:  Re: MAXI TRAC springs

they were the std 50mm lift but the right side rear srpings are slightly more robust u could say......due to the sierra leaning over to the right more or something like that. i had carrolls springs on my sierra to start with and i snapped one in half, and replaced them with dobinsons and they worked quite well

Author:  josh9465 [ Thu Jan 04, 2007 3:39 am ]
Post subject:  Re: MAXI TRAC springs

i bought some maxi trax from repco. they were too hard and didnt even flex very well. the rears were so had the shackles were resting against the stop.

gave them away for free and bought old man emu's

Author:  fenton [ Thu Jan 04, 2007 2:13 pm ]
Post subject:  Re: MAXI TRAC springs

Who sell Dobsons springs? Would putting the 50mm lifted ones in be enough to clear 32's?

Author:  dj181 [ Thu Jan 04, 2007 6:47 pm ]
Post subject:  Re: MAXI TRAC springs

i doubt just by putting the lifted springs in u will get enough lift to clear 32's, and that is with any spring, u would prob have to go body lift and extended shackles as well. the place that sells dobinsons is on pickering rd in enoggera but i cant remember the name of it now

Author:  steve [ Thu Jan 04, 2007 11:52 pm ]
Post subject:  Re: MAXI TRAC springs

yer 2inch lifted springs and extended shackles barely clears 31s. ya still need some body bashing in there too.

Author:  projectzook [ Tue Feb 20, 2007 4:46 am ]
Post subject:  Re: MAXI TRAC springs

maxi trac are cheap s#*t. I had a set on my sierra first because they were cheap., 2.5' height increase yes but no travel the drive was so rough. I would constantly have wheels of the ground which would stop me in my tracks were standard height sierras were just driving straight passed. I now have westralia springs. They are 30mm lift but are so flexy it rediculous. Mate them with SPOA and then u can run a set of 32's with no body lift and body bashing. Check out my car domain site for pics of that lift running 32's mongrels.
www.cardomain.com/ride/2499516 i think that will work. if not just look for pojectzook when i registered i left the r out woops. sorry the thread is so long

Author:  Nev08 [ Wed Feb 21, 2007 3:23 am ]
Post subject:  Re: MAXI TRAC springs

dj181 wrote:
i doubt just by putting the lifted springs in u will get enough lift to clear 32's, and that is with any spring, u would prob have to go body lift and extended shackles as well. the place that sells dobinsons is on pickering rd in enoggera but i cant remember the name of it now


4wd trekmaster I think its called from memory. Do good deals on lovell and lightforce stuff too.

Author:  dj181 [ Wed Feb 21, 2007 6:53 am ]
Post subject:  Re: MAXI TRAC springs

that would be them!!!

Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/