| auszookers.com http://auszookers.com/forum/ |
|
| CV replacement and 02 sensor GV XL-7 http://auszookers.com/forum/viewtopic.php?f=5&t=55207 |
Page 1 of 1 |
| Author: | mrs [ Wed May 23, 2018 1:51 pm ] |
| Post subject: | CV replacement and 02 sensor GV XL-7 |
We have a 2001 XL-7 and was wondering advice on where best to get 2 things and brands - CVs - 02 sensors (as I have a check engine light and have put a scanner on it and it tells me that it is the 02 (oxygen) sensor/s) While I'm at it is there a good place to by spares at reasonable prices Sent from my SM-G930F using Tapatalk |
|
| Author: | ZUZUKI [ Fri May 25, 2018 11:58 pm ] |
| Post subject: | Re: CV replacement and 02 sensor GV XL-7 |
Hi mrs, 1st post - welcome. I don't know there you are, but Bearing Wholesalers in Victoria does driveshafts (I'm guessing that is where the CVs are that you want). I recently priced the Passengers side - less than $150. Don't know of the quality, as we didn't buy it in the end. Bursons (auto parts, primarily to the trade) have NTK oxygen sensors - as good as any. A 4 wire sensor, part no. OZA668-EE10 I believe. will cost approx. $100ea The H27A has 2 - 1 on each bank, neither are exactly easy to access & you'll need a special sensor removing socket. You'll also need to 1/2 climb into the engine bay, take at least 1/2 hour per side & probably swear a bit. Have fun, Rgs Michael |
|
| Author: | 30ONA [ Sat May 26, 2018 6:11 pm ] |
| Post subject: | Re: CV replacement and 02 sensor GV XL-7 |
Spray the o2 with inox at least,30min before attempting to loosen. |
|
| Author: | fordem [ Sat May 26, 2018 9:09 pm ] |
| Post subject: | Re: CV replacement and 02 sensor GV XL-7 |
Not all O2 related codes warrant or will be fixed by replacing the sensors - what was the code? |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|